Assorted K5 parts
 

I have a few parts here for sale that I'm not gonna use. No idea on prices let me know if I'm too far off.
Door Handle 20.00
Hatch Plates (these go inside hatch for hinge) 20.00 a piece I have 2 total
Inside handle 5.00
Hatch catches and hold downs 20.00 (Sold)
Hinge gasket free if you know where it goes :lol:
Body Mounts 20.00 for all ( you have to look up part numbers on bags they are LMC rubber)

All prices plus shipping. I will be at the swap meet in Grand Prairie (Lone Star Park) this weekend. 11/10/2012

Re: Assorted K5 parts
 

If the prices are negotiable, I'd be interested in the hatch handle, the hold downs, and the body mounts. I'd really like to see some pics of what you have. And what is the inside handle?

Thanks
Posted via Mobile Device

(edit) also... Is the hinge gasket new or used?

Re: Assorted K5 parts
 

Interested in body mounts. Trevor

Re: Assorted K5 parts
 

3rd on body mounts pending pics

Re: Assorted K5 parts
 

trying to get pics posted but not having any luck, beer with me .....

Re: Assorted K5 parts
 

Pics! Sorry about the delay

Re: Assorted K5 parts
 

couple more

Re: Assorted K5 parts
 

Interested in just the top hold downs dont need the hatch catches.

Re: Assorted K5 parts
 

I want the hold downs/mounts the hinge plates/gaskets and body mounts. PM sent
Posted via Mobile Device

Re: Assorted K5 parts
 

Hatch plate pics for Jeff G.

Re: Assorted K5 parts
 

Would like the hatch latches if still available

Re: Assorted K5 parts
 

Body mounts, hatch latches and hold downs pending to Jeff G.

Re: Assorted K5 parts
 

Are the hinge plates like originals? Did you use a set after getting them repopped? Thanks Trevor

Re: Assorted K5 parts
 

Trevor, I had one good one and one busted one from my hatch I took them both out and had an exact copy made out of the good one. The shop that I used wanted a pretty penny for just two because the bending process was pretty extensive and required a lot of set up time but once set up they punched me out 4 extras. These are high quality replacements.

I used 2 of the six I got in my rebuild and they fit like a glove and have a lot less flex.

To be clear these are for a K5 Blazer hatch, not a Burb hatch.

Re: Assorted K5 parts
 

I'll pass on the hinge plates. I was thinking it was the covers for the hinges. I think that's why I didn't see them in the earlier photos. Haha. I'll have to see what that leaves me with
Posted via Mobile Device

Re: Assorted K5 parts
 

I just got a chance to compare LMC part numbers for the rubber mounts and these won't work for my blazer. So, with that said... All that left me with was a couple small things so I'll let them slide to the next guy in line. Best of luck
Posted via Mobile Device

Re: Assorted K5 parts
 

Trevor you're up on body mounts.

These are the PNs I have (all LMC rubber and sleeves)
3 x 30-0645 (offset washers)
2 x 30-2044 (middle of cab/front seat in K5s I think)
2 x 30-2038
1 x 30-2020
1 x 30-2038
3 x 38-7210 (sleeves)
2 x 30-2950 (sleeves)

Gary i'll do 10 shipped on holddowns

6t727t2 i'll do 10 shipped on the catches.

Re: Assorted K5 parts
 

I think I will hold off on mounts, but think I will take 2 of the hatch plate thingys for when i redo my top. Just send me a pm with total and how you want paid. Thanks Trevor

Re: Assorted K5 parts
 

Chuck you are up on body mounts.

Re: Assorted K5 parts
 

I'll take the catches lmk details

Re: Assorted K5 parts
 

PM'ses set to 7t2 and Trevor.

Re: Assorted K5 parts
 

Jeff, payment sent for hinge plates. Address is in the paypal message. Thanks Trevor

Re: Assorted K5 parts
 

Ill pass on the body mounts, Thanks

Re: Assorted K5 parts
 

ttt... offers??

Re: Assorted K5 parts
 

ttt one more time