55 project thread
Well felt I needed to escape my introduction thread and get some more pics posted !
how she looked when purchased http://www.two40musclez.com/chevy/thetruckbefore.jpg |
Re: 55 project thread
I was definatley happy with the outcome of the firewall
http://two40musclez.com/chevy/2ndpaint/5.jpg 79 camaro front clip http://two40musclez.com/chevy/2ndpaint/6.jpg |
Re: 55 project thread
|
Re: 55 project thread
Wow man! Nice work, I am going to have many of the same mods done to mine. Looks great, now I know I want to go through with them:)
Welcome to the board! |
Re: 55 project thread
lookin good keep posting pics as you go
|
Re: 55 project thread
Nice job on the smoothed dash!
RE:your dad, If thats a 240Z with a SBC and a tunnel-ram I think he's just fine. |
Re: 55 project thread
no tunnel ram although hes got one in his garage on his 327, that ones just got a scoop.
rear shot ! http://two40musclez.com/chevy/dadsz1.JPG |
Re: 55 project thread
|
Re: 55 project thread
|
Re: 55 project thread
All that hard work is really paying off. Nice job.
|
Re: 55 project thread
|
Re: 55 project thread
|
Re: 55 project thread
Looks like you were busy this weekend!! Looks GREAT!!
|
Re: 55 project thread
|
Re: 55 project thread
Were did you get the fuel cell from? Was it made for our years of truck? How many gallons is it? It looks like a perfect fit.
|
Re: 55 project thread
I got it from the local speed shop called J and M speed center, Gave my buddy steve the dimensions and he found the closest, largest tank that would fit the dimensions. We ended up going with a little bit bigger of a tank which forced me to notch that rear bar the one furthest back.
its a 17 gallon, and only cost 120 vs. the 400-500 for an all aluminum and that included the sending unit, foam baffling, cap, and mounting brackets. The plastic doesnt crack or break like an aluminum would either, it will just conform. |
Re: 55 project thread
|
Re: 55 project thread
It looks like your booster is on the ground and has the vacum port you asked about. Is that the same booster?
Looks like a couple of nice bike hanging above! Do or did you race? |
Re: 55 project thread
yea haha I used to bmx when I was a bit younger those bikes have been there for a long time :)
|
Re: 55 project thread
|
Re: 55 project thread
sweet
|
Re: 55 project thread
SWEET! I'm working on my '59. I took off the bed, gas tank, and seat. The fenders are next.:metal:
|
Re: 55 project thread
My son used to race ABA. He started when he was six and raced off and on until he was 14, he 23 now. I miss going to the races and watching him, I'm sure you Dad knows what I'm talking about.
Your dash looks great! Your Dad really does paint well! |
Re: 55 project thread
got a new manifold yesterday
http://www.two40musclez.com/chevy/polishedmanifold.jpg http://www.two40musclez.com/chevy/polishedmanifold2.jpg and here is a picture of the pretty lights I bought 2 new headlights and left one of the older in there to see the difference the passenger is a new light and the drivers is an older light I had before the project started, you can really see how much brighter the new light is. http://www.two40musclez.com/chevy/workinglightsyay.jpg |
All times are GMT -4. The time now is 09:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com