The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What are these ?? (https://67-72chevytrucks.com/vboard/showthread.php?t=110926)

RON WOODGEARD 07-07-2004 03:41 PM

What are these ??
 
I took these off of something and Can't remember what.. ( I know, DUMB!)

http://www.myoldtruck.com/photopost/...40brackets.jpg

buckola 07-07-2004 04:05 PM

Hey...they look like the blades off my lawnmower !!!

7T1BURB 07-07-2004 06:30 PM

I had the same initial thought...
 
as "Quagmire, but remember installing this on the BURB just last week during assembly (finally "VA Inspected" and on the raod today!!!). The original driver side (only) inner fender support bracket has 4 holes (2 on each "end") and is factory formed in a "S" shape when you look at the end (as opposed to the "U" shape shown in your pic)....realize this is not much help in "identifying", but it will be interesting to find out what these are...have never seen any like these before. As pictured, it appears to be some sort of support bracket (U-shaped).

7T1BURB

70c10 07-07-2004 06:35 PM

Are they seat brackets???

RON WOODGEARD 07-07-2004 08:24 PM

The only thing I have torn down and kept the pieces in the last few years was a 73 up short step bed.. I kind of thought these may have been off of it ?? Whatever they are, They are in excellent condition, No surface rust at all.. :D

72 CustomCamper 07-07-2004 09:01 PM

Could they be the supports for the steps on the step bed???

Chuck

69 Short Fleet 07-08-2004 06:11 AM

They look like their notched almost perfectly (to clear the rivets) that go flush against the inside left and right frame rails at the rear where the bumper brackets go. Well theres a left on and right one anyways, we know that much (lol). Later Doug

Gee_Emm 07-08-2004 09:19 AM

I don't think they are off of a 67-72. They do look like bumper brackets kinda.

stickshift_or_walk 07-08-2004 10:44 AM

The aftermarket produced a "hood stiffener" for the '73 and ups. Could that be what they are?

Just a guess...SSOW :bowtie:

silvertonguedevil 07-08-2004 12:06 PM

I don't know....but if ya had a chain, they would make a mean pair of numchuks!! :lol:

sactoC10 07-08-2004 12:29 PM

put em on ebay and someone will buy them... :)

silvertonguedevil 07-08-2004 01:19 PM

You could claim how rare and pristine they are and make millions!!

Smokie55 07-08-2004 04:10 PM

They look like part of the slider hinges for the rear barn door style doors on panels and burbs. I am not real sure though. Interesting question though.

I say chrome them and post on ebay with no description and see what they sell for. :D

RON WOODGEARD 07-08-2004 05:37 PM

OK, I am sitting here trying to figure????

I haven't had a Burb, So No, The only piece from a 73 up I have had is the Stepside Box. So Maybe on the Step Brackets.???

I like the E-bay idea.. HMMMMM....


All times are GMT -4. The time now is 04:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com