The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   K/5 Jack Location? (https://67-72chevytrucks.com/vboard/showthread.php?t=136456)

special-K 01-18-2005 09:28 AM

K/5 Jack Location?
 
Where is the factory jack located in your K/5?

JayDubBlazer 01-18-2005 10:49 AM

right behind the driver seat I think. Well everything except the jack. I only assume that it was once there because the tire iron was there.

3 on the tree 01-18-2005 10:58 AM

Geeem posted some pics under the optional seat thread that show my rig with the jack with the spare tire mount behind the rear seat. There is a seperate spring similar to the tire iron spring back there to hold the jack.

special-K 01-20-2005 09:08 AM

I was being sarcastic.Every time I`d check for more input on the single seat thing,there was something about the jack location.I figured I`d start a thread about jack location hoping to get info on the single seat.

Gee_Emm 01-20-2005 10:25 AM

Yah that thread kinda got out of hand, I tired to split the jack posts off into a different thread but some of the post also had to do with your original question and jack location so if I were to split it up it would have turned it into a bigger mess.

special-K 01-21-2005 02:13 AM

Yeah well...Lots of good info,to say the least.Guess it`s all inter-related.

pound41 01-21-2005 08:16 AM

Sorry about that fellows I kind of started that. I had never seen the single seat option before. When I saw the tire carrier behind the seat I knew that there had to be a away that the jack and everything could be mounted behind the drivers seat. Since I know that mine was. In all the years of jack threads I finally found someone who also had there jack there. Meathead95 with the single seat option. Sorry again

special-K 01-21-2005 08:49 AM

Like I said,lots of good info there.My sarcasm is purely humor.I`m a wise guy sometimes,that`s all.Sorry

pound41 01-21-2005 10:18 AM

No offense taken I knew when I did it. It would take a life of its own. We have had numerious threads on "The Jack" just felt bad destroying your thread.

Huck 01-21-2005 10:25 AM

Still would be nice to see an original instruction sheet form a Blazer---. We will find one eventually.


All times are GMT -4. The time now is 03:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com