Parting 62 Project
 

Hey folks! I have a 62 Chevy that I pulled apart to rebuild a few years ago, and ran out of both time and money, and it's been sitting (inside) until recently when I lost my storage. Now I need to get rid of it. Wish I didn't have to give up on it, but I've moved on to other projects. I'm hoping some of the parts will help someone else with their project.

Here's what's available:

1962 modified shortbed frame: The frame has been shortened to the same wheelbase as a blazer. It has also been narrowed in the rear, as I was planning on pro-streeting it. The front suspension is from a 72 chevy; it also has AIM 2" dropped lower control arms, 1" cut coils, and Chisolm dropped upper control arms.

Cab: has rust in the floors, all corners. I was told by a body shop that it was repairable, but would cost about $600 to fix it. Small rust pinholes along top of windsheild. Windshield is good, as is small back glass.

Doors: Pretty good shape, good glass. Usual rust, but they were dented by someone unknown while the truck was in storage (nice, huh?)

Front clip: Average shape, rear of fenders are rusty and need fixed; I have patch panels for the fenders. The inner fenders have the usual rust but are repairable. The hood is in good shape except that it has several high-point dents in it. Fixable. The grill is steel and in pretty good shape.

Bed: Unique 5' bed length. I was going to join it to the cab and have the world's only 62 Blazer. Bed is in bad shape, I was saving it for a template to build a new one.

I have some misc parts, but alot of stuff has disappeared over the years.

I'm asking $400 for the whole thing, and I'd rather sell it all together than part it, but I guess we'll see?

If anybody's interested let me know. I don't have anyway of shipping this thing, so I would rather you come to get it. The truck is located in southern Illinois.

This will be my first time posting pics, so I hope I do it right.....

front suspension
 

if you want to part it i need some stuff . front suspension looks good to me

passenger side door
 

i need a good passenger side door minor work need is ok it will have to be shipped ti nj if interested here my email address
edneed20@comcast.net
Thanks Ed

Door shipping?
 

Hey Ed. Sent you an email with more pics. Not sure about shipping any of this, never shipped anything this big before?
:confused:

I also need window regulators
 

Need a good regulator for the drivers side . I would be willing to buy the entire front cross member brakes ect . does it have a power brake booster ?

Crossmember
 

C-1072, The regulator works well on both sides. It does have a brake booster, but it's from a 70's model Monte Carlo. I would be willing to sell you the front crossmember, etc. but the crossmember is welded in. Any chance you'd be interested in the entire frame?

front cross member
 

I couldnt get the frame its a little far for me . If you want you could just unbolt the controll arms and and ship the stuff greyhound .Do you know what year the spindles are ? are they stock or dropped ? Any idea on a price ?

c-1072, The front suspension is from a 72. It has stock height spindles, 2" drop lower and upper arms with new ball joints (they have a little surface rust, but they are still ok.) The spindles, control arms and springs are all powder coated.

I have about $600 in the front end, is $200 plus shipping too much? I also have nearly new rotors, new calipers for it. Interested?

I found some more pics, have lots more, email me if interested:

shipping
 

do you think you can guess the wieght of the spindles controll arms springs bearings calipers roters ect .

Heavy subject
 

<whistle> All together? I wouldn't doubt if it'd be near 200#, at least..... the rotors alone are about 25 or so apiece, the calipers are a good 10 each, and I'm not real sure about the rest, but I don't remember them being light... The truck is about 2 hours away, I'll check the next time I'm down there, should be next weekend.

brakes
 

if it is gonna be to heavy i can skip the rotors i wll have to check on the core for the calipers . a week or to is fine it will give me a few days to put the cash together . i just bought this truck and i will pick it up tommorow

i pmed you about your truck for sale thanks

i would like to get ahold of you asap about the truck let me know thanks

i am interested in your truck can you email me as soon as you can thanks

dloughney@ultrafab.com

i got your pm but it just said i pmed you please get in touch with me asap thanks

check your pms thanks

gostranger
 

Hey where in upstate are you ? always good to find truck nuts in the area .
Todd

More pics
 

It looks like I may have the front suspension sold. Gostranger, I will have a look at it this weekend and try to find out some info on shipping this weekend.

Still lots of parts left. I'm hoping that someone will buy the rest of it lock, stock, and barrell, because I don't want to ship big, heavy parts. I don't really have time to mess with it since it's two hours away from my home. I will be glad to head down there to help you load up if you want the whole thing.

Here's more pics. I will be adding a list of parts that are left when I get back from the holiday weekend.

Have a great 4th! Remember the people that gave their lives so that we can kick back and have a beer on a long weekend in our free country!

Even more pics
 

:c2:

Detail pics

toddro could you post or pm me a way to talk to you on the phone so i can talk to you my email wont work next week i have it off from work but if you pm me your phone # i will call you i may want more parts! thanks

Doors
 

What shape are trhe doors in??? I am looking for two doors that can be repaired. If the door bottom is bad thats fine as long as no dents or bondo.

Raphyel

Doors
 

Raphyel, the doors have both dents and Bondo. If you look at the pics you can see both of them. However, they are repairable. Let me know if you are still interested.

Gas pedal?? Very interested in that

Neat, huh? Don't see many of those anymore...

How about $10 plus shipping? PM me your zip and I'll find out the shipping cost for you.

TTT - Still got this thing and I'm losing storage. Anybody need anything? I'd hate to scrap it...