The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   blazer vs sub part 2 (https://67-72chevytrucks.com/vboard/showthread.php?t=212708)

powder2 10-08-2006 08:13 PM

blazer vs sub part 2
 
will the rear power window parts work on a blazer regulator and handle

powder2 10-12-2006 12:20 PM

Re: blazer vs sub part 2
 
i guess no one knows

Zoomad75 10-12-2006 06:35 PM

Re: blazer vs sub part 2
 
To my knowledge the manual crank handle parts interchange. The actual regulators are close if not the same. I looked at lots of K5 and sub gates when I needed a new regulator for my k5. Got lucky and found a k5 gate with the guts still in it.

Looking at many of both in the bonyards I'd have to say they are probably the same. if you want to confirm it for sure have the local chevy dealer run the part number for a K5 regulator and then a sub and see if the parts interchange. Or check a hollender interchange manual at the local boneyard.


All times are GMT -4. The time now is 12:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com