The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Welcome Area (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=50)
-   -   New guy from Indiana (https://67-72chevytrucks.com/vboard/showthread.php?t=214386)

Storm Chaser 10-26-2006 12:28 PM

New guy from Indiana
 
Hello! I found this site while googling for info on my truck. I have been lurking here for a while, but decided to join when I came across the threads about making a shortbed frame from a longbed. My main truck is a 71 longbed (orange with white roof) with a 350 and a automatic. I just recently picked up a 69 shortbed minus the engine, trans and front sheetmetal. I bought it at the Ducktail Run car show, because I always wanted a shortbed. Come to find out, I got screwed on the deal because the frame was bent in the front (hit on the passenger side).

At the time, I was driving a severely rusted 72. The body was shot, but it was mechanically a good truck. So, after reading the threads here over and over about modifying a longbed frame, I decided to give it a go. The only difference was I used the back of the shortbed frame and mated it with the front of (what was) the 72. I had alot of help from my buddies, and it wasn't as bad as I thought it would be-- we left the engine and tranny on the front frame (327 with manual 3-speed) and left the bed on the rear frame. At this time, most of the 69 short is back together and it starts up, but I still have to find a driveshaft and hook up the brake lines. At least I can still drive my 71 around (which I have dreams of one day rolling a 1-ton frame under and installing a 6.5 turbodiesel, just because...).

At any rate, I look forward to being a part of this community. I love the 67-72 bodystyle and love working on them. Just thought I'd say hi, introduce myself, and say thanks for the frame info I've already used (which was well written and easily understood). I think I'll stick around!

1LoC10 10-26-2006 12:41 PM

Re: New guy from Indiana
 
welcome from Indiana as well... post some pics of your truck if you have any

jsbgump 10-26-2006 12:41 PM

Re: New guy from Indiana
 
Welcome to the board from Texas

BOSS 10-26-2006 06:50 PM

Re: New guy from Indiana
 
Welcome to the board from Missouri and thanx for joining :)

FRENCHBLUE72 10-26-2006 08:52 PM

Re: New guy from Indiana
 
Welcome to the board from southern oregon..

b&a72 10-26-2006 09:47 PM

Re: New guy from Indiana
 
Welcome from Arizona!

steveo10 10-26-2006 11:14 PM

Re: New guy from Indiana
 
another welcome from indiana.

shaneschevys 10-27-2006 01:38 AM

Re: New guy from Indiana
 
Welcome from FT Worth TX.

krue 10-27-2006 03:21 AM

Re: New guy from Indiana
 
Welcome to the board from South Mississippi!:D

1969k10stepside 10-27-2006 04:58 PM

Re: New guy from Indiana
 
Welcome from South West Indiana.What part of Indiana are you from?

LUV2XCLR8 10-27-2006 09:03 PM

Re: New guy from Indiana
 
:welcome2: From West TN :hi2:

Canadian694x4 10-27-2006 11:15 PM

Re: New guy from Indiana
 
Welcome To The Boards!

71SWBChevy 10-29-2006 09:57 PM

Re: New guy from Indiana
 
:welcome2: to the board from KY!

86swb 10-30-2006 08:12 PM

Re: New guy from Indiana
 
Welcome to the board from Western Kentucky.

CAL 58 GMC 10-31-2006 05:22 AM

Re: New guy from Indiana
 
Welcome to the board!

Ron 586 11-06-2006 12:22 AM

Re: New guy from Indiana
 
Welcome from West Tennessee.

Demmit_Hemmit's 65 11-06-2006 05:17 PM

Re: New guy from Indiana
 
Welcome from the big town of Peru, Indiana.......................


All times are GMT -4. The time now is 01:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com