progress pics of 79 pro street
 

Here are some pics of the progress i've made on my 79 blazer. I started the teardown about 2 months ago to update the blazer a little. My plans are to install an air ride suspention, new paint etc. So far I have started smoothing the fire wall and tailgate. I have also installed the front end kit for the suspention. I have a long way to go, but here are a few pics.

Re: progress pics of 79 pro street
 

Looks good, what are you putting in it? you know to make it go fast!!!

Re: progress pics of 79 pro street
 

I would like to know also, what plans do you have for it? :cool:

Re: progress pics of 79 pro street
 

It's going back with the same running gear. It's a 402 bb chevy with a turbo 400 trans. The rear is a ford 9 inch with 4:11 gears. I have never been to the track, but its fast enough for me. My plans are to build a Hot Rod looking show truck.

Re: progress pics of 79 pro street
 

Awesome progress, its looking good. What color you going to paint it? Are the the tires and rims on it the ones you are planning on running? Defiantly should be a blast with the BB!

Re: progress pics of 79 pro street
 

I am going to paint it a yellow called Lemon Ice by ppg. It may go two tone with yellow on top and either white or silver on the bottom. I haven't really decided yet . The wheels will stay the same for now. I will post a couple of pics before I tore it all apart. So you can see what style they are. I hope to one day go with a larger diameter wheel like a 18 or a 20. They just get real pricey when you get them in a larger width.

Re: progress pics of 79 pro street
 

looks cool!

Re: progress pics of 79 pro street
 

I like the color you have on it now. Did you tub it?

I would like to do that to mine and put some big 20's with 345-50-20 tires. That would be so cool!!!
I better stop talking about this before I start thinking more about doing this to my truck. It's only $$$$$ right!!!

cool ride.....

Re: progress pics of 79 pro street
 

yes it is tubbed. It has 15 x 14 inch welds with 33 inch x 19.5 Mickeys on it now. My plans in the future are to go with a 20. I was told they are making them wider now. I think it would look awesome with some 20x14's on the back, I have also seen on this board a company that is making a tire that is 29x18.5x20 how cool would that be!!!! but like you said it's only money.

Look at a post by Layedoutnoma. It shows the 29x18.5x20's on a 67 -72 pickup. N2TRUX directed me to it a while back. Be careful though if you see them you'll want a set.

The thread is http://67-72chevytrucks.com/vboard/s...d.php?t=211015

Re: progress pics of 79 pro street
 

Chevyrod i know what your talking about !!! as soon as i saw those tires i totally changed my plans for one of my blazers (k5) i would love to do a protouring style blazer, i can take out and SMASH a few of those tuners with. your blazers going to be nice keep everyone posted!!!!!!

Re: progress pics of 79 pro street
 

Cool! :)

Re: progress pics of 79 pro street
 

very nice!!! Any recent progress?

Re: progress pics of 79 pro street
 

I should have the air ride system finished this weekend. It took alot longer than I thought it would to plumb and wire everything. I'll take some photos tommorrow of the progress so far.

Re: progress pics of 79 pro street
 

very nice

Re: progress pics of 79 pro street
 

Here are a couple of progress pic from this weekend. I got the air ride working. It took a lot longer than I thought it would. I hooked everything up temp. just to make sure it was all going to work. I'll run everything nice and neat after paint.

Re: progress pics of 79 pro street
 

Where did you get your pumps and tank at?

Keep sending update pic's looks good..

Trav

Re: progress pics of 79 pro street
 

Thanks Trav.
I got just about everthing from *****************. The rear shockwaves I got from ART.

Re: progress pics of 79 pro street
 

Chevyrod,

Tell me a bit about how you have your valves set up. I am gitting ready to but so I need to make sure that I get the right thing. Here is a pic that I put some notes on so let me know whats going on here.

Thanks man...

Trav

Re: progress pics of 79 pro street
 

This is my first time ever doing an air ride system. I have been doing some research and asking alot of questions over the past couple of months and just decided to jump in head first. I have a fill valve and a dump valve for each bag. This enables me to control each bag independently FBSS. The fill valve is first then the dump. When you hit the switch it opens the fill valve which lets the air out of the tank to the bag. When you hit the down switch it opens the dump valve and lets the air out of the bag. I was told by many people it is best to have a set of valves for each bag. I don't now why but that is what was suggested to me. Now that I have started mine, I think if you just wanted to go up and down you get away with just a fill and dump valve for the front and then another set of valves for the rear.
I hope I answered your question.

Re: progress pics of 79 pro street
 

you should have you front indipendent that way you dont end up with extra body roll while doing quick turns. the 8 valve setup is the best in my opinion.

Re: progress pics of 79 pro street
 

Thanks for your help. I think that will get me started.

Trav

Re: progress pics of 79 pro street
 

I got the frame and firewall painted this weekend. What ya'll think?

Re: progress pics of 79 pro street
 

Looks like it's going to be yellow...:)

That's awesome. Your moving along at a nice pace...:metal:

Re: progress pics of 79 pro street
 

NICE work looks really nice

Re: progress pics of 79 pro street
 

Installed the motor today. Here are a few pics.