First Timer
 

Hey everyone,
Seven monthes ago I inherited a 1967 c10 from a family friend that died while I was in Europe, since then it has been sitting in my driveway. Now that I'm back I want to do something with it. Its in pretty good condition, the only problem so far seem to be a squealing clutch and a little under carriage rust, I think I am going to keep it all original. All suggestions and help are welcome, thanks a lot.

Re: First Timer
 

Welcome to the best Darned site on the net for these trucks.Looks like a good starting place.Read thru the forums and you will find tons of ideas on drivability mods.

Re: First Timer
 

Welcome to the board from Texas

Re: First Timer
 

:welcome2: to the board from Mid-MO!!!

Re: First Timer
 

hi, welcome to the boards from Crockett, Texas.

Re: First Timer
 

:welcome2: from Knoxville Tn...

Re: First Timer
 

Sacramento welcomes you to the board.

Re: First Timer
 

welcome to the board! from TEXAS

Re: First Timer
 

Welcome from FT Worth TX.

Re: First Timer
 

Thanks for the warm welcome, what an awesome site.

Re: First Timer
 

Welcome from New Mexico.
You will get answers to your questions if you post in the other forums.
If it were me, I would get all the the mechanicals where they are reliable.
2nd--get the interior like you want it.
3rd---upgrade wheels and tires.
4th--save up for a good paint job.
Most important--have fun.

john

Re: First Timer
 

Welcome to the board from South Mississippi!:D

Re: First Timer
 

Welcome to the board from West Tennessee.

Re: First Timer
 

Welcome from Seattle. There are quite a few board members up in the BC area.

Re: First Timer
 

welcome from WA

Re: First Timer
 

:welcome2: from CT!

Frank

Re: First Timer
 

Welcome to the board from Western Kentucky.

Re: First Timer
 

Welcome - enjoy the truck and be sure to get some seat time before you go tearing it apart so you can see how much fun these trucks are.

Re: First Timer
 

Welcome From Knoxville Tn!!!