tranny swap
has anyone done a manual to auto tranny swap in an 82-93 s-10?
|
Re: tranny swap
what engine?
<please dont say 2.8, please dont say 2.8> |
Re: tranny swap
Quote:
Blazer72, as for the tranny swap, I would say it wouldn't be that hard. especially if you have a donor for all the little brackets you may or not need. The only thing that would give me a problem is that hole your gunna have in your carpet. but if you use an aftermarket shifter. That should cover up that problem. |
Re: tranny swap
Rebuilt 2.8
Yeah, if I do it, I will definately buy a trashed blazer for a donor. |
Re: tranny swap
Well there you go. You'll have everything you need.
|
Re: tranny swap
I was told the wiring harness would have to be changed, for torque converter lockout something or other. I usually don't work on the computerized stuff.
|
Re: tranny swap
Don't let a wiring harness scare you from doing it. I used to be skeptical about swapping out harness until I did a few. 10 out 10 times for me, they have been plug and play. Biggest thing is be patient! Take your time removing the harness. You probably would only have to swap the harness going to the trans itself.
|
All times are GMT -4. The time now is 12:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com