motor mounts
looking for some advice on the best way to mount my 632 its in a 70 short box thanks
|
Re: motor mounts
A motor plate would probably be the easiest and cleanest way.
|
Re: motor mounts
do you know where i can find some pics on all to mount it to the frame thanks
|
Re: motor mounts
You need motor plates or at least a mid plate . That thing has alot of torque so you dont really want to hold it down with just the bosses on the block that could damage the block . You need to get a piece of 3/16" aluminium plate for the front and carve it out to fit . Then use some 1/8" steel on the frame rails to bolt it to . I would use TCI's mid plate / flexplate shield in the middle . They come oversise and are easy to fit . On the trans mount use a quality rubber mount . The tranny needs to be able to move a little to avoid breaking the case . You can click on my link but you might not be able to see much . I'm sure Kevins build thread would give you some idea of how to do it .
|
Re: motor mounts
4 Attachment(s)
here a few I dug up for you.
|
Re: motor mounts
Motor looks great. Thing ought to be a beast.
|
Re: motor mounts
that's the old one stay tuned for the new bullet!
|
Re: motor mounts
Haha "Bullet"... More like Bazooka
|
Re: motor mounts
thanks for some ideas
|
All times are GMT -4. The time now is 08:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com