Parting 1971 Suburban (NM)
 

** I will be chopping this body up after I get most of the parts off it. I'm keeping the door "B" pillars and part of the roof. If you need something somthing let me know. **

**** More parts added!! ****

I need these parts: http://67-72chevytrucks.com/vboard/s...d.php?t=331771

More parts here:
http://67-72chevytrucks.com/vboard/s...21#post3196021

Parting out 71 1/2 T Suburban.

Complete rolling chassis, never wrecked - $500 (trying to sell complete first) or

5 bolt rear (3.07) - $100
5 lug front disc setup - $100
Chassis - $200
Trailing arms - $100
2 piece driveshaft - $50
front sway bar - $50
steering box - $25
auto tranny crossmember - $40
small block motor stands - $30
dual exhaust system with good mufflers and manifolds
gas tank with straps - $60

Power brake pedal setup -$45 + shipping
3rd door shell (no rust/dent free) - $175 + shipping (prefer pickup)
Rear bumper brackets - $30 + shipping
Front cowl (straight) - $30 (pickup only)
Roof rack - $50 (pickup only)
Front Seat - $50 (pickup only)
Blazer rear seat/with mounting stands - $125
Column $50 + shipping
Factory Fuel tank - $75 (pickup only)
manifolds - $40
Heater box - $50
Glove box door -$10 + shipping
2 green visors - $15 + shipping
wiper transmissions - $15 + shipping
ebrake cable setup (both cables that go to the drums) $20 + shipping
ebrake foot pedal $15 + shipping
Upper trim - $100, very straight (minus corner pieces and liftgate piece)
Taillight buckets - $20 + shipping

Wheel tubs (inner) ** Sold to ChuckDriver **
Tailgate/liftgate (no rust) - **Sold to rockc **
Aux tank - *** Sold to RockC pending payment***
Spare tire holder (no rust) *** Sold to 71burb ***
Backup light buckets - *** Sold to Vectorit ***
If you see anything I didn't list, ask for price.

** I will be chopping this body up after I get most of the parts off it. I'm keeping the door "B" pillars and part of the roof. If you need something somthing let me know. **

R/

Re: Parting 1971 Suburban (NM)
 

More pictures......

Re: Parting 1971 Suburban (NM)
 

Last.....

Re: Parting 1971 Suburban (NM)
 

What kind of shape is tailgate in and does it have the complete Chevrolet emblem?

Re: Parting 1971 Suburban (NM)
 

The tailgate is almost perfect. The emblem is broken, but they reproduce them now for about $50.

Re: Parting 1971 Suburban (NM)
 

Pm sent

Re: Parting 1971 Suburban (NM)
 

Is there a stock tank for sale that you would be willing to ship? Thanks!

John

Re: Parting 1971 Suburban (NM)
 

Let me check on the 5 lug fronts and posi rear if somebody can pick them up from you...

Also - any pix of the back seat?

Thanks.

Re: Parting 1971 Suburban (NM)
 

John - it does have a stock tank, and a factory auxillary tank, but I don't think it would be legal to ship due to the fumes. I'll know more when I get it pulled. I'll let you know.

What time frame are you looking at on picking it up? I don't want to disable it from being a roller until I get the body chopped up. Are you sure you don't want the whole frame? I'll get pictures of the middle seat, it's the same as the back 3rd row one, just different brackets on the bottom.

R/

Re: Parting 1971 Suburban (NM)
 

Guess I also should have asked if the rear posi was a coil spring rear - if it is a leaf spring rear - I won't need it...

Re: Parting 1971 Suburban (NM)
 

It's a coil spring rear.

r/

Re: Parting 1971 Suburban (NM)
 

I am going to pass on this set of 5 lug stuff at this time - might have found a better set to use.

Thx.

Re: Parting 1971 Suburban (NM)
 

since were neighbors I thought Id ask you, do you have a dome light lens for a pickup to get rid of? mine cracked in half the other day, also looking for silver sunvisors, I might know a guy wanting your posi rear so I`ll call him tonight

Re: Parting 1971 Suburban (NM)
 

Hey Hart. If anybody buys anything off the burb I can probably deliver it if it is on my way back to Houston. Let me know.
Shawn

Re: Parting 1971 Suburban (NM)
 

No worries. Let me know if something changes.

Hey Mike, No silver visors. I'll look for the dome light. Let me know about the posi.

Thanks Shawn, I appreciate the offer. What did you decide on the bed or did you just want to come by and look to decide? If you need more pictures let me know.

R/

Re: Parting 1971 Suburban (NM)
 

Sorry, I didn't notice no shipping on the tanks.

Re: Parting 1971 Suburban (NM)
 

No worries. I wished I had someone going that way. Do you still need the seat hold down brackets?

Re: Parting 1971 Suburban (NM)
 

Hi Rob
Sorry again about the tanks, also by the way, it wasn't me needing the seat clamps.

John

Re: Parting 1971 Suburban (NM)
 

How much do you want for the front drag link shipped to 28716

Re: Parting 1971 Suburban (NM)
 

How is the left lower body, from the door opening to the front of the rear wheel well. And would this be too big to ship? Thanks Rob!

Re: Parting 1971 Suburban (NM)
 

I'm going to try and sell it together first. If that doesn't work, you have first dibs.


I'll take better pictures this evening.

Re: Parting 1971 Suburban (NM)
 

I may be interested in lower right part of body between 3rd door rocker and wheel arch (inner & outer). Also how's the lower portion between the rear wheel & tail on LH side?

Re: Parting 1971 Suburban (NM)
 

Not in great shape. Here's some pictures.

Pictures posted.

RockC, are these manifolds you are talking about?

R/

Re: Parting 1971 Suburban (NM)
 

Thanks Hart_rod. That actually doesn't look much better than mine. Do you have some pics of the right (pass) side between the 3rd door rocker & wheel? What kind of shape is the right side rear wheel arch?

Re: Parting 1971 Suburban (NM)
 

It was a long shot! Thanks for the pics.

John