Beautiful Day for Truck Work
One of those days when it is really nice to be in the south. Disassembly began today. It's not going to be a total frame off, but I'm going to try and do as much as I can. Goal is to be reassembled by End of September. Maybe no exterrior paint, but drivable for Crusing the Coast.
Oh this is the adverse conditions I had to work in today. This is the in the serious shade temp:D :D |
This is what I got through today. First time going this far on her. Definitely a learning experience. Man the trash that you can find in the cowl and hidey holes after 30 years.
|
Last pic for today. She's all tucked away for visions of a clean frame, fresh paint ed frame and engince compartment, and a non-rusty front end.
Have a good one all. Feels really good when you make progress. |
oops wrong picture
|
Looks like you had some fun, alright... I'm new at this, is there a reason why you started at the front? I took the box off first for some instant gratification, lol...
|
We're having fun now!
It was almost as warm here in ND as it was there! Go El Nino! (SP?) |
Raven Lunatic. The back is coming off also, but the front needed less cutting to get it off. I just abour ready to pull the bed off (maybe tomorrow??) Depends on theose pain in the butt bolts
|
rub it in palf70step...i miss the warm weather and sunshine!!!!!
|
was only about 70 here today,but unforunately this cold including sore thoat pretty much kept me indoors.
|
Well I replaced the rear wheel cly.on the gold 69 and when I pulled the rear drums off the brake shoes had been put on backwards so I swap them around also,after bleeding the brakes I replaced the valvecover's and gasket's then I put aset of pioneer speaker's in the cab so I could here those tunes alittle better also. I think we had a good day and glad to here you guy's did to.
|
Sweet!
My truck is still sitting in the driveway with a major antifreeze leak out the intake.. it needs to be fixed but it's storming like heck outside, whole town is flooded.. sucks. :o |
Pain in the butt bolts!
I used a nut splitter, I figure nuts and bolts are cheaper than knuckles... chiseled the first one and damn near broke my hand with the ballpeen...
|
I had a good day he in NE. I shot a cost of primer on my cab of my truck. will need to wet sand alot to get it smooth
|
I had to put up Christmas lights per the 5 year old son and wife... :( no work on the truck
|
Oh i hate you. Its been aound 3 degrees celcius and its been raining over an inch a day here.
|
All times are GMT -4. The time now is 01:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com