The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   edelbrock advice (https://67-72chevytrucks.com/vboard/showthread.php?t=3504)

mikegi 05-18-2002 07:24 PM

edelbrock advice
 
i'm thinking about getting an edelbrock 2101 or 2701 manifold with 1406 carb and 1207 breather.is this a good combo?and is there any other kits(such as gaskets ect.)I will need.when i buy i would like it complete,manifold,carb,breather,and valve covers,with any misc,gaskets kits.part numbers would help alot,i,ve got the new edelbrock catalog.thanks, Mike G.

------------------
69 4x4chevy swb fleetside
71 3/4 GMC lwb fleetside
68 1/2chevy lwb fleetside parts truck


68 Suburban 05-18-2002 07:28 PM

I have the 1406 carb and I love it.

------------------
Check out other members trucks

1968 50th Anniversary C-10 Suburban (Tows all these cars all over the place)
1968 50th Anniversary C-20 Pickup CST, Sold to Fine69
1969 SS Camaro Conv't
1960 Lakewood Travel Trailer
1963 Ford Falcon Wagon, Still For Sale
Phoenix, AZ.

Click Here for Parts and Venicles I have Available

THINGS I AM LOOKING FOR:
67-68 SUBURBAN TRIM. $$$$ Reward
for finding the 3rd door trim piece
and the small piece that goes on
the 1/4 panel right behind the
3rd door.
Click Here to see the two pieces I need.


dmnall 05-19-2002 01:13 AM

I have the 2101 with a Carter AFB 9635 Setup on my 68 and I am really impressed on how it performs. I would recommend the 2101 to anyone but if I were to buy a new Intake right at this moment, I would buy a 2601 Performer Airgap.. When I ordered my 2101 from http://www.jegs.com I spent 130 for Intake w/ install kit which included Gaskets, New Intake Bolts, RTV and Carburetor Studs. When I ordered my 2101 the 2601 barely came out and I picked up the 2101 with everything I mentioned above (including Carb Gaskets also) for $ 60 less then what 2601 was going for and that was Manifold Only!! This is just my opinion eventhough I have seen the specs on the 2701 and I don't see spending 20 over the cost of the 2101 for the performance increase but Air Gap is the way to go if you want the better performce over the 2101 and 2701 Manifolds !!

------------------
Truck #1 68 Chev LWB Fleet w/ Wood Floor (Sucks Gas and Hauls Ass!) and in process of Body Work...

Truck #2 1994 GMC Sierra SL w/ 4.3L Vortec V6, 4L60E Auto!!


superchevy 05-19-2002 02:53 AM

I'd go with the Performer RPM or AirGap.
The Performer 2101 is just a little better than a stock intake.
SC


All times are GMT -4. The time now is 09:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com