Underhood painting/electrical advice?
 

I've got a 72 swb (non A/C). I've blown the motor up in, so while it's getting rebuilt I thought I would spend some time under the hood cleaning things up. The wiring harness had a mile of electrical tape on it, and 4 WIRE NUTS. Also, why the motors out I thought I would also paint the fire wall and inner fenders.

I guess my questions are......
-What have you guys done with the harness where it attaches to the radiator support? I don't like the look of the original plastic wire holder on the support or the one on the top of the firewall.

-What do I paint me master cylinder with? I painted the brake booster with gloss black krylon, but if brake fluid gets on the m.s. it will peel right off, right? Someone suggested brake caliper paint, but...?

Thanks in advance.

Re: Underhood painting/electrical advice?
 

Free bump heres a clean pic I saved..well maybe a few..hang on

maybe powdercoat? Idk..

Here ya go im interested also..

Re: Underhood painting/electrical advice?
 

Capt'n you might try using Eastwood M/C paint as they claim the paint will resist brake fluid break down. I used paint from O'Reilly when I painted my new M/C, and just touched up as needed.

As far as running wires, it will be up to you as far as how you want to run the wires. There's wire loom, and other products that can be used to cover the wires depending on the route you will be taking, but regardless of what product you use, make sure to keep them safe as they are the lifeline for your truck.

If you're considering using electical tape to wrap the wires, be sure to use some high quality tape. IIRC, the tape that GM used didn't actually adhere to the wire like common electical tape does, resulting in a non-sticky removal.

Re: Underhood painting/electrical advice?
 

I hate unwrapping old electrical tape STICKY!

I wish I bought a 'good lookin' truck and did easy things to make it better lookin vs things noone sees and doesnt make it run better, just keeps it runnin'!! Any other pics? I'll be doing this this summer hopefully!

Re: Underhood painting/electrical advice?
 

Thanks for the advice. I'll probably just try the O'Reilly's caliper paint and see how that goes. If it doesn't work good, I'll buy a new caliper for $17.00. As for the electrical tape.....I pulled all the tape off, and put the entire harness back in black wire loom. Over 30' of wire loom at 3 different sizes. It should look a lot better than it did. After rebuilding the motor, I had to do it on the cheap, but I'll post some pictures of the finished product.

Re: Underhood painting/electrical advice?
 

Pictures pictures pictures!!!!

Re: Underhood painting/electrical advice?
 

Subscribed! ...and nice pics Oldblue!

Here’s some shots of what I’ve done and have yet to do…

As you can see, I’m in dire need of durable paint for not only my MC but also the booster bracket and manifolds, inside
the fenders, hinges…still a long way to go.

On my wiring, I’ve almost finished wrapping and hiding all of the wires going to the upper hood wire shroud. Some
wires that are not in use yet, like the kick down switch wire, have been coiled up and hidden behind my carb.
http://i186.photobucket.com/albums/x...d004Medium.jpg
Personally, I like the stock wiring looms (excuse the fact that mine are 40 years old) but because they don’t fully
contain the wires on each end, most of those sections in front have been carefully wrapped and secured under the
fender and core support lips.
http://i186.photobucket.com/albums/x...d005Medium.jpg
For the front left wires that actually go to the alt, etc I again wrapped them and placed them as low as I could.
On the black background they are nearly invisible.
http://i186.photobucket.com/albums/x...d006Medium.jpg

Have fun with your clean up and we would love to see some pics of what you have done so far!

Re: Underhood painting/electrical advice?
 

ahh yeah commin' along! Im not doing mine until I get my motor build (my current one leaks oil like crazy and would be pointless plus I have rust everywhere..

Re: Underhood painting/electrical advice?
 

It never occured to me to wash clean my underhood area i Know it looks like crap STILL but tons better than it was before (forgot before pic)

Someday I'll have a new motor painted nice polished valve covers mine get oily fast lol new inner fenders painted firewall painted and cleaned

I just sprayed purple power EVERYWHERE and started scrubbing:smoke:

Re: Underhood painting/electrical advice?
 

I have a freind in the poder coat biss we did inner fenders core suport and al the small parts

master cildner i have used epoxie it holds up well

Re: Underhood painting/electrical advice?
 

Well now that Rob posted his pics........I'm not posting mine!

My truck is a turd compared to yours. That's a sharp truck and engine bay, I wish mine looked that good.

Re: Underhood painting/electrical advice?
 

X2 :metal:

Re: Underhood painting/electrical advice?
 

Here is a before shot.
http://i556.photobucket.com/albums/s...p/truck016.jpg

Here she is as of this morning. Still needs a little cleaning, but it will have to wait until the motor is back in.
http://i556.photobucket.com/albums/s...p/DSCN2842.jpg
http://i556.photobucket.com/albums/s...p/DSCN2843.jpg

I will post more picutes after the motors in and she's all prettied up.

Re: Underhood painting/electrical advice?
 

Well I still haven't painted the M/C, but everything else is pretty much done. There is still a little bit of detailing and cleaning up, before I put it up for sale. I found a 72 Blazer I really want, and the family is growing, so its got to go. :(


BEFORE!
http://i556.photobucket.com/albums/s...p/truck016.jpg


AFTER!
http://i556.photobucket.com/albums/s...Picture002.jpg
http://i556.photobucket.com/albums/s...Picture001.jpg
http://i556.photobucket.com/albums/s...Picture004.jpg

Re: Underhood painting/electrical advice?
 

just lovin those lazyman rubber fuel lines

hope they post pics after the fires

Re: Underhood painting/electrical advice?
 

here are a few before and after of mine. I used a pressure washer connected to our hot water heater & simple green.

BEFORE

http://lh4.ggpht.com/_7xE_rpLWmj0/TG...28Small%29.JPG

http://lh4.ggpht.com/_7xE_rpLWmj0/TG...28Small%29.JPG

AFTER

http://lh5.ggpht.com/_7xE_rpLWmj0/TG...0/DSCF0183.JPG

http://lh5.ggpht.com/_7xE_rpLWmj0/TG...0/DSCF0184.JPG


Still need to figure out paint for the MC and booster.

Re: Underhood painting/electrical advice?
 

there is a caliper paint in silver, it matches the alum. intakes REALLY close, thats what I did mine in, leme see if I have a pic....oh I did my waterpump with it too...

Re: Underhood painting/electrical advice?
 

still under construction
Attachment 621726

Re: Underhood painting/electrical advice?
 

purple power the firewall getrid of the air cleaner (heard bad things about em) and organize the wires/hoses..

That motor looks good, I like that red!

Re: Underhood painting/electrical advice?
 

air cleaner was a freebe got a Edelbrock Carb here thats shot from results of backfiring. gotta get me some wire loom and some wire so I can hide the wires a little better. that's an old picture. i've done a little bit since then, just haven't taken any pictures. some of the hoses aren't even needed. still left over from stock intake.

Re: Underhood painting/electrical advice?
 

Here is my before and after shots of my redo:


Before

http://i364.photobucket.com/albums/o...Red/Chrome.jpg



After

http://i364.photobucket.com/albums/o...s/67e8bf2f.jpg


http://i364.photobucket.com/albums/o...s/8577bf65.jpg

Re: Underhood painting/electrical advice?
 

That turned out nice 6772owner, nice work!

Re: Underhood painting/electrical advice?
 

before/after

This is my most recent pic, I have some finished pics with braklines and stuff...I will eventually get longer batt cables and hide those, and do metal lines vs rubber, and re route my gas line, still unsure on that, need some other peoples to figure out what i wanna do

Re: Underhood painting/electrical advice?
 

72Blckbuty: Thanks, sometimes my OCD pays off, took me 3 days to do the parts swapping. :lol:
Posted via Mobile Device