What did you get done 11/21/2010
 

I didnt get much done how about you all?

Re: What did you get done 11/21/2010
 

for me was day 3 of putting new inner lower door and door skins on a buddy's '72 project. tommorrow ill start bondo work on it. was a longbed that he cut down to make a shorty. going pretty well. hpefully ill be done with everything by friday, have to bondo the bed where he spliced it still.

Re: What did you get done 11/21/2010
 

I got some stuff done- i changed ALL fluids in the K10- oil-trans-power steering-coolant-brake-and rear end oil- put an Edelbrock 1406 on and it runs 10x better than the old quadrajet, and had all new exhaust put on-

Re: What did you get done 11/21/2010
 

I assembled an engine crane. Didn't do anything to the truck directly.

Re: What did you get done 11/21/2010
 

Hooked up stock radio with 2 nos front speakers and 2 universal rear 4 x 10 speakers from this guy http://www.turnswitch.com/speakers.htm

They fit in the stock brakets perfect. Radio sounds ok for stock.

Re: What did you get done 11/21/2010
 

Getting ready to start another 10+ hour shift. 2 more weeks and I'll be back home. Santa Rosa is boring...

Re: What did you get done 11/21/2010
 

waxed mom's new car
http://sphotos.ak.fbcdn.net/hphotos-..._2029490_n.jpg

Re: What did you get done 11/21/2010
 

Learned how to R&R the inner door panel on our Saturn 3-door coupe, electric window got stuck in the down position Thursday. Fixed. (thanks to 'you tube' actually)

Last week-end of this year that I'm wasting fuel for mulching leaves.:uhmk: Also was the last and final run of this year for firewood with the truck and trailer Saturday. Today stacked wood in the crib and our garage in preparation for the beginning of winter. Still have a trailer to unload sometime.
http://i957.photobucket.com/albums/a...rica/last1.jpg

Looking forward to a long Thanksgiving week-end off from the day job! Hope to start cleaning up the C-30 engine this week. Still gathering parts for the upcoming fuel delivery system rehab project with a refreshed engine compartment. Always something to do or I'd be dead.:lol:

Mark:chevy:

Re: What did you get done 11/21/2010
 

Didnt get nothing done, had my tonsils removed so I have been laid up. But after I get over this, work will begin back on my 76.

Re: What did you get done 11/21/2010
 

I got quite a bit done today. I painted my block yesterday and installed all the covers and new plugs in it today. Also installed my accecory bracket.

Re: What did you get done 11/21/2010
 

Started the rust repairs on my newly acquired '50 Chevy. Test fitted the outer cowl panel and welded in the right side floor panel.

Re: What did you get done 11/21/2010
 

Looks like fun stuff. Do you have a nice big shop to do all that stuff in?

Re: What did you get done 11/21/2010
 

Nah, the garage is 18X30 but it sure does look bigger with just the cab in there. LOL.

Re: What did you get done 11/21/2010
 

Got my 89 C/K Jimmy Rear bumper,front air dam and steering wheel installed on my Dually :)

Re: What did you get done 11/21/2010
 

Well i ordered some parts for the 80.I got a pair of LED stepside taillights on order n hopefully they`ll be here next week.Also ordered some stuff for the engine, and should have a package comming from brothers this week to help assemble the rear bumper.Tried to test fit the radiator NOPE to small. Talked to the guy, gonna ship it next week for a correct 1(my bad not his).Ordered some parts for my 70 cougar, overall spent some money and not alot accomplished.Oh also sent out more parts for powdercoating.

thanks
pat

Re: What did you get done 11/21/2010
 

I worked yesterday so I didn't get much done. Today I rewired a Bro-in-laws utility trailer because his dog hate the harness up. After that I spent some time organizing all the parts I bought last week. Later I pulled the seat in my 77 so I could remove the Ride Tech E3 ECU. It is going back to Ride Tech for updates.

I sold the 12 bolt, and wiring harness kit. I listed a pair of 73-80 fenders- LINK

Re: What did you get done 11/21/2010
 

Looks like your all in to it. Have you seen this thread on Lateral G? NSANE 52' Chevy Truck- LINK

Re: What did you get done 11/21/2010
 

went to pull a part an got the passenger door wire harness for the locks on power windows. one of the connections decided to brake when i pulled the door panel off. an i got the switches to they look brand new o and the best part dad got me e early Christmas present a battery also at the yard i got a battery hold down cramp.
http://i1034.photobucket.com/albums/...2010_15211.jpg

an i help strip a 69 ferd... got more pics to come if i can get them uploaded an if any one want to c more
http://i1034.photobucket.com/albums/...010_183511.jpg
http://i1034.photobucket.com/albums/...2110_10351.jpg

Re: What did you get done 11/21/2010
 

Took a trip to the pik-n-pull in San Antonio and made out well. Got a dang near mint dash pad for my Jimmy. It's dusty but there are no cracks, no scratches, nada. Heck of a deal for $15 bucks. Got a factory floor mat for the front of the cab, some assorted aluminum trim pieces and a nice glove box. All in all pretty successful trip.

Re: What did you get done 11/21/2010
 

Wow!

Thanks for the link!

Re: What did you get done 11/21/2010
 

Well since my 77' is now done I went and bought a 67' today.

"winter project"

I pick it up tomorrow so, no pics yet.

Re: What did you get done 11/21/2010
 

centexan - were the yards in San Antonio any good overall?

Got the 87 running again. Nice and smooth. Timing was slightly off. Smooth as silk now! :)

Degreased and powerwashed the 2WD Frame for the 74 Jimmy Conversion

Re: What did you get done 11/21/2010
 

I only went to the pik-n-pull today and it was ok. There a lot of square bodies, but pretty picked over. I just luck out when I go. Last time I went I got a center console like the two you have for your 74. I guess it depends on what you're looking for. I haven't ever been to any of the other ones. Are they pretty good too?

Re: What did you get done 11/21/2010
 

Pulled the cluster out and replaced all the dash lights so I can see my speedometer, oil pressure, volts, and engine temp at night! Of course, now my tachometer doesn't light up. :lol:

Re: What did you get done 11/21/2010
 

This weekend I replaced the upper and lower intake gaskets on my moms 03 Pontiac grand prix and I got the crank pulley off and the cam pulled out of the 6.0
http://i147.photobucket.com/albums/r...0/100_2640.jpg