60 dodge truck
 

well i had picked up a 47 plymouth at the start of the year. didnt do alot to it and wanting another truck to work on i sold the plymouth. looked around abit and nothing really around within my budget. so sufring CL one day i seen an add for a 60 dodge truck, and got to thinking when was the last time i seen one of these on the road let alone at any shows. so emails sent, the owner calls and i looked at the truck. it had the 230 flathead 6/4spd it ran and was actually inspected till the end of this month, but it did have an electrical issue as it drained the battery. but the P.O drove to my place. well i wasnt worried about as i didnt plan on running it anyway. well the m/t got sold just last week and i plan on sitting the body on a gen1 swb dakota chassis. will have to shorten the bed alittle. just not sure on what im going to run for m/t yet. will be getting the cab off the stock chassis with in the next week and on to my dollie to do alittle floor and step work. overall from what i had looked at this will need less work then what i have dealt with over the years. actually i have a few spots on the outside of the cab to take care of but i dont plan on any paintwork at all on the outside, just a few primer spots here and there. ok time for the pics

Attachment 671604

Attachment 671605

Attachment 671606

Attachment 671607

Re: 60 dodge truck
 

Sounds like a cool plan. The old Dodges are neat looking trucks.

Re: 60 dodge truck
 

I like! what engine will you run?

Re: 60 dodge truck
 

not sure on the m/t yet. it depends on what i find out there but if nothing comes up i will just have to go with the tride and true chevy setup

Re: 60 dodge truck
 

Do tha tried & true 318 before you put a chevy in it....

Re: 60 dodge truck
 

i wouldnt mind keeping it mopar but hell i can find gm stuff alot cheaper of even free at times. to really be different i even though about running an AMC setup

Re: 60 dodge truck
 

i used to have one of these, same model, i put a 318 with plans on a 360, if you take care of them they run better and last longer then any chevy or ford. but they are crazy expensive to do anything for them. but really nice find. i hope to find another one in the future, love the weird body style haha.

Re: 60 dodge truck
 

i sold the m/t last week and the guy finally picked it up today. so i did some cleaning in the garage and i got the cab off the frame so i can do some floor work and new front mounts on sunday

Attachment 672154

Attachment 672155

Attachment 672156

Re: 60 dodge truck
 

Hey nice truck here's my 58 dodge. I bought a 92 dodge dakota with a 5,2 magnum for $350.00 drove it home and ripped the body off and dropped the 58 on

Re: 60 dodge truck
 

looks good there RAD, you have anymore pics of the build

Re: 60 dodge truck
 

yes i do. i'll start a build thread of my own soon my dakota was an extended cab so i shortened the frame to the wheelbase of the 58 it's not that difficult to wire the computer to the 58's harness it was just three wires and turn the key and she will start. if you go this route i can assist you

rich

Re: 60 dodge truck
 

Just a few more

Re: 60 dodge truck
 

you truck looks in fairly good shape, and i see you have a fleetside style bed, wish i could find one for my truck. can i ask ya what is the measurement on your truck from the bottom of the rocker/door to the ground

Re: 60 dodge truck
 

right now it measures ten inches from the bottom of the door to the floor. i have plans on putting drop spindles on it and lowering blocks. i'd like it lower for the kind of truck i want to build.

Re: 60 dodge truck
 

any update?

Re: 60 dodge truck
 

i messed with alitle the other day, but i found a 57 cab today that is actually in better shape them my cab. i think im gonna snag it up as i do like it better as i dont have to mess with reworking the step inside the door. do you have a pic of yours with the front clip on at all?

Re: 60 dodge truck
 

no i don't why do you ask?

Re: 60 dodge truck
 

i was just courious to see how the wheels look like in the wheelwells

Re: 60 dodge truck
 

they fit in the center of the wheel opening i am missing some mounting brackets to install the fenders they are from a 60 the cab is a 58, so i have to make some bracket s and a front crossmember for the radiator support

Re: 60 dodge truck
 

surfing somewhere i seen that the rad support falls between the frame horns on the dakota, and one pic i seen the guy just made an "L" bracket to mount to the support.
well did a surfing lastnite and i decided to keep my stock frame. im right now in the process of shortening up 6". will be heading back to the yard to in a couple of days here for the 57 cab and a jag front ifs, as it will get the truck to low as i want it and it wil be a fairly bolt in setup with a few mods to the stock frame rails and a couple of brackets. will post a few pics later tonite

Re: 60 dodge truck
 

jag suspension sounds interesting are you just picking up a 57 cab? or are you getting the front sheet metal also? if you are that's arare truck ,cause they onlly made that front end one year i'll be looking for your pictures later...

Re: 60 dodge truck
 

well i will be about 2/3rds of the front fenders as someone else had cut the front face off the truck already. i can use whats left for alittle patching of my fenders

Re: 60 dodge truck
 

a couple pics of todays work. i know it isnt much but i did shorten the frame
6" as it will work out in the end and to me will look better proportioned, plus the stock tank will fit in the stock location. the section i cut out i trimmed down and used on the inside of the frame to bring it all back together. i also got the rear shackle loose and just let the frame drop down onto blocks i set on top of the rear itself, which will be about the drop im looking for in the back. (sometype of notch required). will be getting the front suspension off tomorrow so im ready for the jag clip when i go get either monday or tuesday

Attachment 674312

Attachment 674313

Attachment 674314

Attachment 674315

Re: 60 dodge truck
 

progress always feels good doesn't it

Re: 60 dodge truck
 

yea it does, but waiting for parts is what sucks. for the 1st time in years i dont have a truck to drive or i would be going for the front clip tomorrow. so i have to wait on my buddy to get it next week