header problem
So where going to try to come up with a idea but has anyone had problems when installing a 350 into a 67 C10 engine forward (was a straight 6) and have 83 crossmember in truck. The #2 header pipe on drivers side is hitting lower control arm. Complete set up is 67 C10 350/700r4 and motor has V8 stands with 83 crossmember. Thanks for any info guys!
|
Re: header problem
I would post this in the 73 to 87 forum also.
|
All times are GMT -4. The time now is 12:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com