|
Selling off Blazer parts
******** CONSIDER THIS STUFF ALL SOLD. MOST OF IT IS. ANYTHING LEFT WILL BE POSTED AT A LATER DATE IN A NEW THREAD>*******
Ok, trying to drum up some capitol to pay down some debt, so I've decided to start selling off my blazer parts stash. Windshield Top Brackets - $45 shipped per pair Rear Hatch Latch Brackets - $55 shipped for the pair Blazer door striker pieces - $35 shipped for the 3 pieces http://i282.photobucket.com/albums/k...k/100_3788.jpg Ash trays $20 shipped each http://i282.photobucket.com/albums/k...k/100_3786.jpg http://i282.photobucket.com/albums/k...k/100_3785.jpg http://i282.photobucket.com/albums/k...k/100_3784.jpg Arm Rest. Green $20 shipped http://i282.photobucket.com/albums/k...k/100_3780.jpg Single Wall Top Lights and wiring. No Cab Harness, just the top wires - $30 shipped. http://i282.photobucket.com/albums/k...k/100_3793.jpg NEW 31 gallon tank. Never had gas in it. Great shape. Not sure if NOS or Aftermarket. Great upgrade and can ship since it didn't have gas, although buyer pays all shipping costs. $150 plus shipping. http://i282.photobucket.com/albums/k...k/101_0258.jpg Radiator to fender triangles in good shape. $24 shipped for the pair http://i282.photobucket.com/albums/k...k/100_5865.jpg Rear bed splash shields. Removed from a Longbed pickup. Good shape. http://i282.photobucket.com/albums/k...k/100_5866.jpg http://i282.photobucket.com/albums/k...k/100_5867.jpg Nice shape Take off Rocker Box Set. These parts were removed from a 1972 2wd blazer in California and then shipped to me last year. They are in very nice shape, very solid, and very hard to come by in take off form. This includes the Rocker Boxes, end caps and filler pieces for both sides. $450 picked up. Will consider shipping Greyhound only, but buyer pays all shipping and boxing costs. Rocker (Torsion) boxes: http://i282.photobucket.com/albums/k...r/100_3285.jpg Rocker (Torsion) box end caps (bad picture, no rot, both there, just surface rust like the top half shows): http://i282.photobucket.com/albums/k...k/100_5868.jpg Rear end cap filler panel. http://i282.photobucket.com/albums/k...k/100_5871.jpg http://i282.photobucket.com/albums/k...k/100_5872.jpg Fuel filler cover that came with my blazer. Has some minor rust issues at the bottom, but solid otherwise. See pictures of actual item. I believe only the lip rusted off, it's solid from that point on. $45 shipped US. http://i282.photobucket.com/albums/k...s/100_6458.jpg (Yes, that is a piece of wood attached to it) http://i282.photobucket.com/albums/k...s/100_6459.jpg http://i282.photobucket.com/albums/k...s/100_6460.jpg Exhaust heat shield from driver's side of a 71 2wd pickup. $25 shipped http://i282.photobucket.com/albums/k...k/100_5864.jpg Blazer rear hatch windows. have two with old gaskets $50 each plus shipping. Shipping will be tough. Pickup preferred. Buyer pays for shipping and handling. http://i282.photobucket.com/albums/k...k/100_6746.jpg Hood Latches. Good shape. Not sure on the years. $25 shipped each. http://i282.photobucket.com/albums/k...k/100_5852.jpg Pulleys. Not sure what they are for. $25 each shipped/bo http://i282.photobucket.com/albums/k...k/100_5851.jpg 1978 Blazer Enblems - $45 shipped http://i282.photobucket.com/albums/k...k/100_5846.jpg Radiator Support brackets. $25 per pair for the smaller, $35 for the larger. http://s282.photobucket.com/albums/k...t=100_5839.jpg I am open to offers on some of the stuff. Pickup preferred on the larger items. Everything is in 13790 |
Re: Selling off Blazer parts
How much for the rocker end caps shipped to 95822?
|
Re: Selling off Blazer parts
I'll consider an offer on them PMed to me. At the moment, I'd rather not split up the package, but I might change my mind.
|
Re: Selling off Blazer parts
Quote:
|
Re: Selling off Blazer parts
All prices are negotiable. Shoot me a price at what they are worth to you, and if it works for me, we can make a deal.
Also remembered I have a NEW aftermarket (I believe) front and rear chrome bumper for a 70 blazer if someone is interested in those. The rear is a sport bumper I believe $275 for those. Prefer pickup, but may consider shipping greyhound. I have a decent driver front chrome bumper off a 70 suburban. I believe there is a dent behind the license plate on it. I think the brackets are even still on it from the 70 GMC suburban. $70 picked up for that with brackets. Also have a MINT CST Blazer passenger side bucket seat with track and hold down bracket. It is black with the scroll pattern seat cover I believe. Not sure if it was recovered or not, but it looks nice with no tears, just dusty. $225 for that picked up. Not sure on shipping. I have a set of Red on white bucket seats and rear seat, no brackets, that could be used for a driver, but probably need to be recovered. I know there are some rips in the backs, and maybe one or two in the seat area. $125 picked up for those. Again, I am open to offers. PM me an offer if you don't want to make it here. The truck will be for sale soon as well. |
Re: Selling off Blazer parts
Interested in the bucket seats, single and the set. Do you have pictures? If you want to email them you can send to agapup@aol.com. Thanks
|
Re: Selling off Blazer parts
JimmyFloyd,
Interested in the rear sport bumper brackets you bought off the board a couple of months ago. If you are selling, how much shipped to 14004? |
Re: Selling off Blazer parts
I may be interested in these if they are what I'm looking for. Could you send me a pic?
Rear Hatch Latch Brackets - $55 shipped for the pair Thanks, Gibber |
Re: Selling off Blazer parts
72GMGUY - I'll get pictures this evening of them. Have to dig them out.
rsavage - need to see on those. i don't remember what happened to them. They are in the upper right of the picture http://i282.photobucket.com/albums/k...k/100_3788.jpg |
Re: Selling off Blazer parts
Do you have the radio speaker and cover that hangs under the dash.
|
Re: Selling off Blazer parts
I have 2 or three speakers, but mine wasn't hanging under the dash. Mine was actually mounted up under the dash and faced down. Will have to make sure I still have the brackets and get pictures.
|
Re: Selling off Blazer parts
Here's one of the truck speakers (I think) I have
http://i282.photobucket.com/albums/k...1/100_8836.jpg http://i282.photobucket.com/albums/k...1/100_8837.jpg Will get pictures of the others. Also found a set of rear interior side panel standoffs. $45 shipped. http://i282.photobucket.com/albums/k...1/100_8835.jpg And a set of 04 GTO Speaker pods that I was going to use in my door or kickpanels, but now most likely will not. Still would require a hole cut, but they angle the speakers nicely. Speakers included, but untested. - $45 http://i282.photobucket.com/albums/k...1/100_8990.jpg http://i282.photobucket.com/albums/k...1/100_8991.jpg Pogo Stick. Remember your youth. $35+ ride http://i282.photobucket.com/albums/k...1/100_8995.jpg |
Re: Selling off Blazer parts
Also have a used 4" lift. Front Spring, Rear Blocks, off a 71 Blazer. Comes with Shocks and u-bolts as well, although some nuts might be missing. No pictures yet. $150. Potential shipping via greyhound.
|
Re: Selling off Blazer parts
What are the chances of a safe shipment of the rear glass to 49120.
Ive never shipped glass but it has to be possible right?? |
Re: Selling off Blazer parts
Jimmy -
I'm interested in the torsion box package. I see you listed it for $400 in the truck section. Would you consider $350 + shipping? I know shipping will be a big chunk, so I'm trying to see If I can make this deal worth the money and effort. Thanks. Craig |
Re: Selling off Blazer parts
I can see about shipping the glass. I found this link on it. Materials would be part of the shipping cost, but that shouldn't be too bad.
http://www.glasscampus.com/tutorials...ng%20Glass.pdf As for the rocker boxes, $400 is the lowest I can do at the moment. A rough estimate of cost via greyhound was $110, but I would need to find a box and get the weight for an exact one. There is $15 difference between 80lbs and 100lbs (above quote) when getting the quote. I've got a bunch of PMs to reply to as well, so I will respond and offer things to people as they sent me message. |
Re: Selling off Blazer parts
What diameter speakers go in the gto pods? Is that price including shipping?
|
Re: Selling off Blazer parts
I'll measure them tonight. The price wasn't shipped, but I can do $50 shipped on them, which basically splits the cost.
|
Re: Selling off Blazer parts
Jimmy -
Thanks for the quick reply on the torsion boxes. I will commit to the $400 asking price. Please let me know what the total cost for shipping will be to Santa Ana, CA 92707 via Greyhound. For your security, I can send a deposit so you are sure that I won't back out after you go through the trouble of packing and getting shiping cost. Let me know. Thanks. Craig. |
Re: Selling off Blazer parts
Fesser - from edge of the metal ring to edge of the metal ring is about 6 1/4", maybe a hair less. The longest length is 9" from screw ring to rounded point, and the recess about 2" in depth. I also made sure to get the wire pigtails for them too, so they can be removable.
clesczki - I PMed you about them. You are first in line, and i'll consider them sold with a deposit. As stated, shipping should be around or under $110, but I will try and get them boxed up this weekend and get an accurate amount for you. Will have more parts to list later tonight |
Re: Selling off Blazer parts
72GMGUY - Sent you some pictures
rsavage - these are the bumper brackets I have right now: http://i282.photobucket.com/albums/k...1/100_9213.jpg http://i282.photobucket.com/albums/k...1/100_9386.jpg |
Re: Selling off Blazer parts
Okay. Thanks for checking. Don't see a set of rear inners for 69-71.
|
Re: Selling off Blazer parts
Tough to see the red seats. What are they out of and do they have seat tracks on them? Thanks.
|
Re: Selling off Blazer parts
Quote:
Will wait to hear from you then thanks. jim |
Re: Selling off Blazer parts
looking for both exhaust manafolds for 72 4x4 blazer
|
| All times are GMT -4. The time now is 08:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com