The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Flettside side steps (https://67-72chevytrucks.com/vboard/showthread.php?t=49910)

THOR 50 04-22-2003 07:32 PM

Fleetside side steps
 
Need a little information guys.
Did these come in pairs?
Are they after market or GM installed?
If they came in pairs does anyone know of a source?

http://pic7.picturetrail.com/VOL193/...7/23186319.jpg

CPNE 04-22-2003 07:58 PM

Not sure if they were sold as pairs but they can be installed on either side (or both). They are a dealer installed GM option, not aftermarket. You can still find them as NOS from time-to-time. Check with some of the smaller parts vendors like GMCPaul, Wes, Pickupman, etc. They may have or know where to locate.

teeitup 04-22-2003 08:28 PM

I think there is a set on ebay, Blazerman put a post about a set on the parts board.

dinnut 04-22-2003 08:28 PM

i thought this was a joke at first.

teeitup 04-22-2003 08:41 PM

The set on ebay sold already, they were NOS for $35.00

Longhorn Man 04-22-2003 10:27 PM

Heck, go to your dealer. I know as of 3 years ago a dealer in Tx was able to get them at 20 bucks each.
Try P/N 988423. In the late 50's when they started making them, they listed for 10 bucks each. Comes complete with a template showing where to cut.

THOR 50 04-23-2003 06:24 PM

Thanks I'll try that, P/N 988423


All times are GMT -4. The time now is 08:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com