The 1947 - Present Chevrolet & GMC Truck Message Board Network - DE First Gen. 4x4 Blazer Part-out

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)

- - DE First Gen. 4x4 Blazer Part-out - PHASE 1 (https://67-72chevytrucks.com/vboard/showthread.php?t=509766)

First Gen. 4x4 Blazer Part-out - PHASE 1

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

How much to ship the console to 55744? Any damage or extra holes in it? I will take it pending more info.

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

I'll get you a shipping price ASAP. There are 4 screw-sized holes drilled in the front vertical side of it. Would not be visible unless on the laying on the floor, so I suspect not an issue? Other than those, no holes.

Quote:

Originally Posted by too much stuff (Post 5196995)

How much to ship the console to 55744? Any damage or extra holes in it? I will take it pending more info.

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Quote:

Originally Posted by dujobu (Post 5197010)

Any cracks around the upper section around the hinge? You can check parcel post shipping to keep the price down if you like.

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

I will get inline on the console and would like a shipping quote on the tailgate if you are willing to ship it. Thanks.
Posted via Mobile Device

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

I am interested in the screws and plastic bushing that goes on the doors for vent windows. Also interested it rear hatch with handle pending condition and price.
Thanks
Rock C

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Interested in the tailgate, You going to be working on it Tomorrow?

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Interested in the poly tank. Do you know if the stock sending unit works in it?

Richard

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

hi, interested in red fenders if they are the ones you would be selling?? thanks

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Hey John. Yes, I'll be here from about 11:30am on. Let me know if you're coming by.

Quote:

Originally Posted by warbucket (Post 5197387)

Interested in the tailgate, You going to be working on it Tomorrow?

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Hey Richard. There is no sending unit on the poly tank. Just the tank and the hoses you see attached to it in the photo.

Quote:

Originally Posted by richard2717 (Post 5197458)

Interested in the poly tank. Do you know if the stock sending unit works in it?

Richard

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Not sure which fenders are going to be sold yet. Wil let you know when I figure it out.

Quote:

Originally Posted by jimer1964 (Post 5197461)

hi, interested in red fenders if they are the ones you would be selling?? thanks

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

I'll give you a call around 11:00 am.

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

is those lift springs ? wished they was front springs

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

I forgot to mention my zip code for the shipping quote on the tailgate. 99320. Thanks.
Posted via Mobile Device

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Tailgate sold to local friend this morning. Sorry about that.

Quote:

Originally Posted by Truckseats (Post 5198078)

I forgot to mention my zip code for the shipping quote on the tailgate. 99320. Thanks.
Posted via Mobile Device

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

I'll get in line for a passenger front inner fender well on phase 2!
Posted via Mobile Device

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Do you happen to have a interior spare tire carrier by any chance
Posted via Mobile Device

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

ill take grille and insert
please quote shipping to 91020
or north hollywood greyhound thanks

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

if you have any of the jack hardware i would be interested.

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

I do not. Sorry.

Quote:

Originally Posted by Cheyennekid (Post 5204310)

Do you happen to have a interior spare tire carrier by any chance
Posted via Mobile Device

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

OK will get back to you ASAP.

Quote:

Originally Posted by fleetwoodss (Post 5204792)

ill take grille and insert
please quote shipping to 91020
or north hollywood greyhound thanks

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

How much for just the boot on the B&M shifter - not the metal piece - just the boot (if no tears, etc.) - if you are willing to separate.

Thanks.

Re: First Gen. 4x4 Blazer Part-out - PHASE 1

Any info on the rear springs, are they lift springs, made by who, usage time? Thanks