1972 custom camper cheyenne Big block AC truck getting parted
5 Attachment(s)
This truck turns over but I can't get it to start, I will start parting it out Sun. I have another one almost a mate to it only a GMC coming in next Tues evening
72 C20 custom camper cheyenne 402 big block with AC Ask questions in thread Money orders only, if you send a check I will cash it and wait for it to clear (2 weeks) before I ship part I ship fed ex and charge what they charge me guys have 24 hours to decide once I answer their questions and get better pics Complete set of AC brackets $250 shipped PS pump and brackets $210 shipped 3 piece alt brackets $110 shipped all 3 motor pullies $100 shipped 72 motor stands and mounts $175 shipped air cleaner $30 plus shipping air cleaner spacer and hose $30 shipped-sold turbo 400 kickdown gas pedal setup $50 shipped exhaust manifold heat shield and tube it will completely parted out so if you see something you need ask and I'll price Thanks Randy |
Re: 1972 custom camper cheyenne Big block AC truck getting parted
5 Attachment(s)
766
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
5 Attachment(s)
82222222
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
5 Attachment(s)
88888888888
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
5 Attachment(s)
93333333
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
3 Attachment(s)
9999999
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Randy how much for the A/C dash with the balls and center vent and HVAC controller?
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Hi Randy I would like the camper wire harness, tailgate handle cover if it has one,and upper tailgate trim, pending condition Thanks Josh
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Hi Randy, I'll take it! Just kidding. Looks like a great one as usual. How much on all the seatbelts? Thanks, Sharpie
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Is the upper side molding in good shape. Very interested
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Randy,
How's the headliner and trim. I'm interested pending price picked up of course. Posted via Mobile Device |
Re: 1972 custom camper cheyenne Big block AC truck getting parted
how much for the steering column minus the wheel? what shape is it in?
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
How much for the outside dome light, and the headliner moldings (If it has them)? PM me
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Hey Randy how much for the door panels if they're not chalky?
Thanks Tom |
Re: 1972 custom camper cheyenne Big block AC truck getting parted
ill take the rear taillight harness pending condition thanks Jess
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
also the gas pedal and cigarette lighter with bezel
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Randy - interested in Custom Camper door emblems for a spare set if intact pending price....thanks. Pete
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
How much for 400 emblem's? Thanks
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Hi Randy, Sharpie beat me to the belts! Darn..put me in line for them. How much for the manifold heat shield and tube? (not priced) I'll take the air cleaner spacer. Price and condition of the e-brake & brake pads and trim, Cheyenne emblems, grill bowtie, head lamp RH bezel, fuel tank sending unit (is the sock good and does it work 1 or 2 port), slider, sunvisors, window vents looking for NICE ones, battery cables if original, all pos. battery cable retainers (frame, pan rail, and motor mount), starter heat sheild, engine wiring, trans vac mod. line, dist vac line w/hose & retainer, fuel line from pump to carb, carb, dist., and vent window screws and bushings. In line for the "400" emblems, "custom camper" emblems, and taillamp wiring if not butchered up. No hurry, Thanks, Tom
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Randy, If the motor does not sell as a whole to 2000tj and if no one else needs them I would like to get the bolts for all of the brackets and the mounting bolts to the block for the brackets.
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
If the slider is a GM slider I will take it. Would like to see a pic of the writing on the window. no hurry on it but I wanted to get in line
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Damn Randy, where do You find these trucks?
Glove box door for me. :) and put me inline for the headliner trim and headliner. (after pricing and condition). I'll take the GBD from the GMC also randy if its in good shape. Thanks Glen Posted via Mobile Device |
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Randy, how about the paint divider trim on the back of the cab? Price shipped to 46562 please. No hurry.
Thanks, Mark |
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Randy what condition are the vent windows in? how much for the set?
|
Re: 1972 custom camper cheyenne Big block AC truck getting parted
Hi all take the fuel line from the pump to the carb if the fittings are in goog shape thanks.
|
All times are GMT -4. The time now is 06:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com