wtb Clean K20
 

Anyone have one of these laying around?

- '69-'72 3/4 ton 4x4
- Long wheel base
- 4-Speed Transmission
- NP205 Transfer Case
- Small Block Motor
- Steel bed
- Straight/Clean Frame (No rust or modifictions)
- Clean Body, Prefer Original with no restoration work

This truck is probably sitting in the Southwest desert right now waiting for me to take her home. Any assistance in my search would be greatly appreciated.

Thanks,
Eric

Here is the truck for you.
1972 Custom20 3/4 4x4
Grants Pass Oregon
*************************
factory tow hooks
tilt wheel
new tires
new front bench seat
everything you asked for except the 4speed.
Glove box sticker says it came with a 4 speed but now
it has a fresh 350 turbo with shift kit.
If interested, email me at
pbjohnson2@aol.com
:bowtie: :bowtie: :bowtie: :bowtie: :bowtie: :bowtie: :bowtie:

I already have your truck under consideration along with jerry moss's K20. I am going to hold out a bit yet and see if a 4-Speed shows up.

I saw in one of your other posts that you know a guy in Chico who can locate about anything. Could you give me his name?

Joe Cruces Classic Auto Sales. Chico, Calif.
Joe 530-345-9779

Is that the truck that sit's out in front of EXTREME BEAN or PAT'S SANITATION...

Nope, Its the truck that rarely leaves my driveway off 199 near RCC. I think Ive driven it 100 miles since I bought it 2 months ago.
Its for sale and Ill make you a great deal on it!

I have a 1971 GMC KE2500 Very Nice
 

New 1971 GMC motor going in it today. It is completely new underneath. Here is the option list and a few pix:
'71, GMC, KE2500, 3/4 ton, 4X4, Invader 350 V8, Custom Camper.
Brand new 71 GMC 350 V8 less than 100 miles on the rebuild
Completely new brakes including drums and rotors with new all stainless e-brake system.
New Heavy Duty custom-made drive shafts front and back with grease circs on ALL u-joints including front wheel couplers. Completely rebuilt Dana 44 front end with all NEW parts and new Warn Lock out Hubs.
New Headman Ceramic Coated Headers, 2.5" aluminized pipes with H- pipe and Flowmaster 70 series Mufflers. Best sound I have heard out of one of these 350s, not to mention excellent performance.
New MSD HEI with new spark plug wire set and wire management
New S&B Air filter (like K& N but Stainless Steel)
New Edelbrock 1406 Carb
New Edelbrock Performer Intake
New Edelbrock Elite Valve covers with Edelbrock Elite breather and Oil filler cap
New Edelbrock IAS shocks.
New Holly Electric Fuel Pump (in place but disconnected at present)
New Holly Manual Fuel Pump
New upper and lower ball joints RT AND LFT.
New Dash Bezel
Nickel Chromed Plated Glove box door, console metals, and shift rings (4x4 and 4 speed)
New Dash Pad
New 6-piece carpet set Gas tank cover, kick panels, lower doors, and cab floor all triple sound insulated
Rebuilt 1971 GMC Bucket seats and console with New 3 point harness seat belts.
Refinished original knobs, shifters (4x4 and 4spd), e-brake release, vents (R and L) with PPG Clear coat.
New Star bed liner
New Deluxe Side lamp lenses front and back
New Wild Country 265 60 15Mudders (less than 3000 miles)
Repainted Factory 8 lug Wheels
Factory 1” Chrome rims (new to me)
Factory Stainless Steel 5 lug wheel covers with front holes for the Warn lockers(new to me)
Gun blued and clear coated Factory Tow Hooks (new to me)
Repainted / Undercoated Frame, Differentials, and wheel wells
New Front Bumper
New Custom Camper Door Script RT. and LFT with 1 set of the originals also.
New Alternator
New Wiper Motor
New Washer Pump
New Interior Dome Lamp
New Arm Rests RT and LFT
New Door Locks, Glove box Locks and Ignition (all matching the same key)
Custom Heavy Duty Tow Hitch Receiver Back Bumper
New Fiberglass Jason topper that fits PERFECTLY even has space for the cargo light
New powder coated battery boxes (both sides CUSTOM CAMPER)
I also have all the stock items that were replaced above in storage for anyone who would like to restore it to factory including the original bench seat with the original cut sheets and receipts for everything.

It is a 4 speed~!
 

Here is the exterior. It needs a new bedside on the drivers side as I slid off the driveway this winter in the ice and snow. $12,000 firm~!

Side view
 

Side view

Brewski, Nice truck! Ill trade ya!

Phillip I would like to have your truck and keep this one too~! I have somewhere between 18k -20k in this one but I am low on money and luck right now so it has to go~! I was working for Lucent when I started this project but no more funds for this toy~! The new motor is getting painted with Chevy orange POR-15 motor paint and it is so sweet~! Wish I could keep this one and buy yours also but times are tough~!

To me, there is NOTHING finer than a CLEAN 71-72 G.M. Truck!
Ive had Powerstrokes, and Cummins, but they will be dead and gone and our older G.M.'s will still be there, chugg'n down the highway and getting a thumb's up!

Phillip you should check out the reuck at Xtreme bean it is sweet ....I see you live just down the road from me....Did you ever find door's......I have a passenger that is pretty cherry but need's some rust romval .... If you want it it could be your's ....

Im up off of 199 and Midway/Timberidge, west of RCC. Where about are you?
Is it hot today or what?:cool: :flag: :cool: :cool:

That is a nice ride Brewski. I am going to try and do a marathon road trip in the near future and take a look at some of these trucks.

I live on schroeder lane...Or hot rod lane the guy from huck's garage is first with his blue 57 chevy pick-up and then there is a bone stock 68 G.M.C. with original hub cap's and me and my 2 72's and a the guy just past me has a pro-street 57 chevy sedan with flames.. And heck ya it;s hot