The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - th350 shifts too hard (https://67-72chevytrucks.com/vboard/showthread.php?t=551642)

shipma2

11-13-2012 01:00 AM

th350 shifts too hard

my transmisson caused a tooth to break off my ring gear in the rear differetinal. why would a th350 do this help!

3r!c84

11-13-2012 01:02 AM

Re: th350 shifts too hard

has it always been doing this?
shift kit?
when was it rebuilt?

shipma2

11-13-2012 01:32 AM

Re: th350 shifts too hard

previous owner said shift kit. i dont know ifits been rebuilt all i know is its one thing after another

bk2life

11-13-2012 01:54 AM

Re: th350 shifts too hard

Quote:

Originally Posted by shipma2 (Post 5699765)

my transmisson caused a tooth to break off my ring gear in the rear differetinal. why would a th350 do this help!

your trans did not do this.

dont care how big of a shift kit you have, trans brake, and the best slicks hooked up like their glued on the street..

INSIDIOUS '86

11-13-2012 01:54 AM

Re: th350 shifts too hard

That's not a bad shift. A lot of people strive for that. If your ring gear looses a tooth then it was a Grenade with the pin already pulled. Fix that replace your u joints and enjoy the next 100,000 miles out of your trans
Posted via Mobile Device

shipma2

11-13-2012 02:40 AM

Re: th350 shifts too hard

your probably right. come to think the differential was leaking oil when i first got it home maybe thats why the tooth broke off. thanks!

All times are GMT -4. The time now is 07:14 PM.