The 1947 - Present Chevrolet & GMC Truck Message Board Network - 65 GMC Lowered 5/7 with 20" steelies tucked in.

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- General Discussion (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=15)

- - 65 GMC Lowered 5/7 with 20" steelies tucked in. (https://67-72chevytrucks.com/vboard/showthread.php?t=556173)

B_Bob

12-14-2012 01:37 AM

65 GMC Lowered 5/7 with 20" steelies tucked in.

4 Attachment(s)

Could you guys help me out and make it look like my truck is roll'n on these 20 inch steelies and lowered down 5 front and 7 rear. It's going to be a static drop, so not all the way to the ground. Thanks

CC69Rat

12-14-2012 02:55 PM

Re: 65 GMC Lowered 5/7 with 20" steelies tucked in.

1 Attachment(s)

In all the pics, the front edge of the lower front fender is kinda chopped off .. so I had to push the front wheel up just a tad to make it look right. .. but. :D Looks good man.

Realistically the front wheel is up too far, but you'll get the idea. This is not bagged, but a 5/7" is pretty low.

B_Bob

12-14-2012 11:23 PM

Re: 65 GMC Lowered 5/7 with 20" steelies tucked in.

Quote:

Originally Posted by CC69Rat (Post 5758093)

Thanks very much. Looks great. I could see it in my head before, but now I can show others!

All times are GMT -4. The time now is 08:20 AM.