Paging Bruceman, Paging Mr. Bruceman
Its been highly (and repeatedly) recommended by a respected fellow forum member that I ask you to photoshop my truck with my pending drop before I drop it, to make sure its what I want... (The issue is how to low to go with a LWB and making sure the change in altitude doesn't make the bed look abnormally long)
So, if you would please sir.... I'm on the verge of a 3" drop up front (picking up 3" drop springs and shocks from Bhelton next weekend) and (pending measurement of my scrub line), 2 or 3" out back (I don't think I can get 3" drop blocks- can anybody confirm?). If I can only do 2" in the rear for now I am ok with a bit of a rake. I hope that this is not wasted money and effort- I don't know how low this truck is from stock now just with the wear and tear of 43 yrs on the suspension. I'd hate for this to be a lift kit! If you can get really fancy, I'm planning on chevy (car) rallys for wheels (15x7 up front, 15x8's out back). (you don't have to keep the oil leak drip pan in the pic!...damn oil leaks....) Pics below, I can email you original hi-res if you'd prefer.... Thanks!!!!! http://i780.photobucket.com/albums/y...ps9ef7c07f.jpg http://i780.photobucket.com/albums/y...psc1d3d0a1.jpg |
Re: Paging Bruceman, Paging Mr. Bruceman
1 Attachment(s)
John, Here is a quick 3' drop. I'll find a set of rallys to put on it later today.
Attachment 1161988 |
Re: Paging Bruceman, Paging Mr. Bruceman
1 Attachment(s)
Here is a set of rallys, I Found just now. John, You can send me the large files by Email if you want. I'll PM you my email address.
I think your on the right track with a 3 or even 4 inch drop.:metal: Attachment 1161991 |
Re: Paging Bruceman, Paging Mr. Bruceman
Bruce is the bomb when it comes to photoshop!!
|
Re: Paging Bruceman, Paging Mr. Bruceman
Quote:
I'm going to do the 3" drop and finish it later with front spindles and a c-sectioned hind end. thanks!!!!! |
Re: Paging Bruceman, Paging Mr. Bruceman
Quote:
|
Re: Paging Bruceman, Paging Mr. Bruceman
That looks nice. No too much, not too little. Thanks for taking the time Bruce
John, if you want to see what it would look like with a chrome rear bumper, he could probably hook you up. He did one for me, and so he probably already has the bumper sample. He'd need a shot from the back while standing maybe 8 feet back |
Re: Paging Bruceman, Paging Mr. Bruceman
Quote:
I am looking forward to getting the chrome one on there (need to buy the whole kit- brackets and all) and the taillight/tailgate trim I'm missing but the front is just a bumper away from being done so its first! |
Re: Paging Bruceman, Paging Mr. Bruceman
He does do nice work. And just in case you didnt know there is an entire area here devoted to photoshop requests ...
http://67-72chevytrucks.com/vboard/f...splay.php?f=33 |
Re: Paging Bruceman, Paging Mr. Bruceman
5 Attachment(s)
John, Here is a finished 3' drop using the high res pic you sent me. Note the oil pan is missing, found some 6 lug rallys and cleaned the spot off the driveway. :)
Attachment 1162627 The next 3 are quick jobs, so you can see even lower drops. Attachment 1162630 Attachment 1162631 Attachment 1162632 This last one is a quick job of the 3" drop on the angle shot. Attachment 1162633 Thanks guys for the complements, |
Re: Paging Bruceman, Paging Mr. Bruceman
Pretty good talent bruceman, John your truck looks good with a 3" drop.
|
Re: Paging Bruceman, Paging Mr. Bruceman
aw man, why did you do the lower drops? Now 3" won't be anything.... click, click, click of your mouse and *BOOM* goes my wallet! :lol:
Very cool and definitely gets my butt in gear to lose some altitude and change the attitude. Thanks! |
Re: Paging Bruceman, Paging Mr. Bruceman
Good work Bruce!
|
Re: Paging Bruceman, Paging Mr. Bruceman
Quote:
|
Re: Paging Bruceman, Paging Mr. Bruceman
Quote:
Quote:
|
All times are GMT -4. The time now is 01:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com