" Old Farm Truck"
5 Attachment(s)
I recently purchase a rolling shortbed frame from a local member. I was not real sure what I was going to name the build until I went to have the frame blasted. I had contacted a local guy who uses water and glass beads to remove paint and rust. I loaded up the bare frame and went to the shop. I decided to wait since the shop was a ways from the my house. When they started blasting the frame a smell began to cover the back area of the shop, when the blaster took a break he came over and said this frame was under an old farm truck can you smell it? So I figured that would be a great name for the build. I ordered a complete suspension kit from CPP along with a ford nine inch rear ench narrowed two inches from the factory length. I am planning on putting in a big block and doing a few mods, but the truck will look mostly stock. I bought a cab two months ago from a cali board member, I am being told it is on the way. I hope so as I have been patiently waiting :smoke:. I hope you will follow along with me on this build
|
Re: " Old Farm Truck"
5 Attachment(s)
more
|
Re: " Old Farm Truck"
Following along.
Looks good so far, keep it up. |
Re: " Old Farm Truck"
4 Attachment(s)
Not alot of progress on the build. I have her sitting back on the ground with her new shoes. I decided on Ridler 695 20x10 rear and 20x8.5 up front. I found a local guy who worked me a smoking deal on wheels and tires. Mounted the battery in the rear I am loving the billet mount. I am geeting close to having the engine built and ready to go already have my TCI 400 super street fighter ready to go in. I also have the repro bed bolted together, got to do some massaging before she will be ready.
|
Re: " Old Farm Truck"
What kind of truck are you building? Year? bed? I see you are pulling out all the stops and sparing no money in building this truck.
|
Re: " Old Farm Truck"
Cool build, so far. What year short bed?
|
Re: " Old Farm Truck"
I am building a 68 short fleet side. I made the decision early on that this truck would be what i wanted it to be. The last two trucks I built were both fuel injected, so I am changing it up with this build. I am certainly being mindful of cost, but I figure I better not cheap out with all that HP or somethings gonna break!
|
Re: " Old Farm Truck"
4 Attachment(s)
I got a good deal on a March pulley system so I decided to change things up a bit. Tell me what you guys think? I ordered some sanderson BB8 headers they should be here this week so hopefully I can get this beast on the frame.
|
Re: " Old Farm Truck"
I just have to tell you that will get some attention. It looks tuff.
|
Re: " Old Farm Truck"
Cool Build Rob, frame and suspension looks awesome.
|
Re: " Old Farm Truck"
Wow and the engine is phenomenal, it looks like a real beast.
|
Re: " Old Farm Truck"
Thanks! It made good power on the dyno, truck should be alot of fun! I appreciate the good comments.
|
Re: " Old Farm Truck"
Is that the crate ZZ427?
|
Re: " Old Farm Truck"
Not a 427... its a 496.
|
Re: " Old Farm Truck"
Thanks. It's hard for me to tell.
|
Re: " Old Farm Truck"
Any header updates??
|
Re: " Old Farm Truck"
The header on the driver side hits the motor mount. i am using bb8 s with POL mounts. I will post pics of the fix as soon as i get a chance to work on it this week
|
Re: " Old Farm Truck"
Looking good!!
|
All times are GMT -4. The time now is 10:32 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com