Parting out 70 Blazer
 

Bringing back my old 70 Blazer from MA to VA over Thanksgiving. Body is pretty much toast. I bought it a few years ago and never did anything with it.

Previous owner said it had a rebuilt 350 with only 5,000 miles on it when it was parked. When I get it back I'll see if the engine is any good. I may keep some parts for my project, but let me know if you are interested in anything before I decide to scrap the rest. Will be located in Linden, VA.

Thanks,
-Tim

Re: Parting out 70 Blazer
 

Interested in transfer case cover for the dana 20 as well as the trans hump cover or just the trim ring for it I see pictured. Also for the screws on the door near the vent windows. Do you have the original speaker anywhere?

Re: Parting out 70 Blazer
 

I'll check all that out when I go up to get it on Tues and let you know.
Thanks

Re: Parting out 70 Blazer
 

Thanks. I can clarify if you need me to on any of the parts. Unk if you have the doors or not but I need the screws and plastic collars near the vent windows on the '70 as well as the other parts I mentioned.

Re: Parting out 70 Blazer
 

How bad are the rear bumper brackets? Metal radiator tube, and oil dip stick. Thanks Trevor

Re: Parting out 70 Blazer
 

I need a fuel filler cover if you have it
Thanks

Re: Parting out 70 Blazer
 

Will check on all that too and let you all know.
Thanks,
-Tim

Re: Parting out 70 Blazer
 

Is the rear bumper a white sport bumper? If so, pics please, and price shipped to 92315, thanks.

Re: Parting out 70 Blazer
 

How is the front carpet trim?

When you get a chance can you post a picture?

Re: Parting out 70 Blazer
 

By chance does it have a np205 transfer case? I'm looking for the mounting brackets from the frame to the case. Also looking for a transmission crossmember for an auto trans I doubt that a manual trans crossmember will be the same but just thought I might ask. Thanks JJ

Re: Parting out 70 Blazer
 

I would be interested in the below items, pics please.

1) Front seat mount parts, driver and pass
2) Ignition lock if it is a "J" keyway, other parts too, if price is right.
3) Tailgate seal brackets\trim
4) Duel wall top hardware

Thanks
Jim

Re: Parting out 70 Blazer
 

Looking for a gas tank skid plate.

Re: Parting out 70 Blazer
 

I'm looking for the u shaped strap that supports the steering column right under the instrument cluster.

Re: Parting out 70 Blazer
 

How is the grill?

Re: Parting out 70 Blazer
 

Radio?

Re: Parting out 70 Blazer
 

I'll check on all these things guys and PM responses. I'll be up there on Weds and loading it by the weekend. Headed back to VA on Saturday

Re: Parting out 70 Blazer
 

Windshield frame any good? I'm interested, thx

Re: Parting out 70 Blazer
 

right rear quarter?

Re: Parting out 70 Blazer
 

I'd like the K5/Blazer emblems pending condition and pictures please.

Re: Parting out 70 Blazer
 

Saddle defrost vents? Underdash CB bracket and screws? Rubber bumpers that attach to the top and help secure the hatch?

Thanks, Pete

Re: Parting out 70 Blazer
 

How bad is the windshield frame?

Re: Parting out 70 Blazer
 

How is the condition of the chrome on the ashtray in the rear seat armrest. Could I get a closeup picture. I will take it pending condition and price. Also would like to be next in line for the bucket seat mounts and tracks both rt and lft. Thanks.

Re: Parting out 70 Blazer
 

Interested in the condition of the door alignment shims and the plastic door caps...the ones on the top of the door over the wing windows.

Re: Parting out 70 Blazer
 

review mirror and cover

Re: Parting out 70 Blazer
 

i just emailed this page to Clamcake he is in Easton i hope he gets you before you head south his brother and he r doing a frame off can you pm me a cell #thanks
jz