WTB 60-66 suburban or panel filler neck
60-66 suburban or panel filler neck, door and sheet metal. I want to install a door and fill assembly in my 64 fleet. I have the fuel tank already under the bed.
|
Re: WTB 60-66 suburban or panel filler neck
I have a door off of a 59 nomad, it might work if you can't find anything else.
|
Re: WTB 60-66 suburban or panel filler neck
Thanks. I'll keep it in mind. Is it just the door? Do you have a pic? After a quick web search, it looks to have a lot of curve. Quite a bit more than fleetside bed?
|
Re: WTB 60-66 suburban or panel filler neck
I have some Suburban/Panel fuel fill doors with the surrounding sheetmetal. I'll have to check and see if I have any fill tubes left.
|
Re: WTB 60-66 suburban or panel filler neck
Thanks, Capt
|
Re: WTB 60-66 suburban or panel filler neck
Quote:
|
Re: WTB 60-66 suburban or panel filler neck
Sorry but I haven't had much time with working 12hrs a day 7 days a week. I did not find a filler tube at my shop, but I should have one at home in the garage. I just need to find the time to look for it. I'll try and get to it this weekend.
Quote:
|
Re: WTB 60-66 suburban or panel filler neck
Quote:
|
Re: WTB 60-66 suburban or panel filler neck
No need to apologize. I did find some filler tubes. I'll send you a PM.
Quote:
|
Re: WTB 60-66 suburban or panel filler neck
4 Attachment(s)
Here are a few pics of what I have. It does have a small rust hole on the backside as shown in the one pic.
|
Re: WTB 60-66 suburban or panel filler neck
Thanks Capt for fixin me up, it looks good to me. It appears to be easily repairable. Just to be sure I understand how these fit, the "box" will go between the inner and outer bed sides (skins) and the filler will connect to my tank on the plane between the top of the frame and the bottom of the bed wood? When it is set up like described, the curves will match?
Capt. Said "It looks like the shipping will be $21.00 which makes the total $86.00". actual shipping was $32.75 Capt, I want it. PM sent |
Re: WTB 60-66 suburban or panel filler neck
I did look at the wagon one and it is way to curved for a pickup.
|
Re: WTB 60-66 suburban or panel filler neck
Quote:
|
Re: WTB 60-66 suburban or panel filler neck
I haven't installed one of these in a pickup box yet, but yes the filler tube should pass between the top of the frame and the bed floor. If you are using the Blazer tank, you may have to modify the filler tube , the tank neck or both. It shouldn't be difficult to do.
The inner box of the filler door assembly will interfere with the inner bed panel. You will need to either trim the fill door box, or make a small bulge in your inner bed panel. The Suburbans and Panels have a bulge in the inner wall to accomodate the filler box. I replied to your PM. Quote:
|
Re: WTB 60-66 suburban or panel filler neck
Quote:
If anyone that is following this wants to see what I built: http://67-72chevytrucks.com/vboard/s...d.php?t=428182 Post # 4. Thanks, I have not been able to actually look a sub or panel. I’ve been trying to see from forum photos. I believe this is going to work well. PM sent regarding Payment |
Re: WTB 60-66 suburban or panel filler neck
The filler arrived in great shape. Thanks to Captainfab. Balance for shipping sent to capt's PP acct.
|
Re: WTB 60-66 suburban or panel filler neck
By chance, do you have another one of these door setups?
|
All times are GMT -4. The time now is 03:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com