1964 C10 db on 22s
 

We bought this truck from an Amish guy. We also bought a 2001 silverado from another amish guy. The 01 truck was originally going to be a body drop on 22 truck. We started at a torrid pace building a 2x4 tube frame. Corvette rear independent suspension with a cantilever set up. Air ride tech control arms. It was going great then we lost interest and family became more of a priority. Along the way dad bought this C10 I fell in love with it instantly. Fast forward 6 years and I sell my old show truck and buy both trucks from dad and have the idea of a 64 with a LS and laying body...... and go

Re: 1964 C10 db on 22s
 

The upper and lower control arms are on the original 01 front stub all air ride tech we made the bag mounts to match the arms

Re: 1964 C10 db on 22s
 

This is the rear of our frame and one side of our cantilever. It is 28 inch longer than the 64 c10 and .5 inch narrower. Seems like an easy fir right.... ya thats what we thought to

Re: 1964 C10 db on 22s
 

Got the cab centered up on the new frame and measured up to lay pinch perfectly

Re: 1964 C10 db on 22s
 

I'm in. Loking bad A$$$$$$$$

Re: 1964 C10 db on 22s
 

Our 10k mile ls motor and one 50 year old rust free short box and the boss testing out the huge seat

Re: 1964 C10 db on 22s
 

Little back Window has to go. Drove 4.5 hours to Pella Iowa to buy a big back glass section from brent in pella. He has tons and tons of 60~66 stuff. We found him on kc mo. Craigs.

Re: 1964 C10 db on 22s
 

Should have waited to take piks until after the welds were ground.

Re: 1964 C10 db on 22s
 

Found some rust. Behind the custom moldings on the side. A little metal work never killer anyone.

Re: 1964 C10 db on 22s
 

Since we no longer have the 01 steering we neededto mate the old to thenewwhich is no prob. We used a slick column out of a 72 chevy and shortened it 8 inches jusrt for look on the inside. And it doesn't hurt when your 6'4 to have alil room

Re: 1964 C10 db on 22s
 

I wish I had known you were in Pella, I would have driven over to meet you. I only live 12 miles west. Ray

Re: 1964 C10 db on 22s
 

Have you ever bought anything from those guys over in pella? Brent his dad and maybe uncle. They have a warehouse full of stuff I think they go out west and bring back a truckload of c10s

Re: 1964 C10 db on 22s
 

The cantilever cams we had them water jetted out of 1/2 in steel.

Re: 1964 C10 db on 22s
 

Building our bag brackets and mounting plates getting the cantilever assembled.

Re: 1964 C10 db on 22s
 

My pops the master fabricator

Re: 1964 C10 db on 22s
 

Tablets suck... rotating piks not my strong suit

Re: 1964 C10 db on 22s
 

Wow, this is super awesome! Keep the pics coming, I dig it!

Re: 1964 C10 db on 22s
 

Not yet, I will have to give them a call when I start the body work on my 64. Next time you head this way give me some notice.

Re: 1964 C10 db on 22s
 

Ya absolutely will. We might be heading up that way soon. Looking for a nice c60 grill so if nothing pans out here I'll be heading up

Re: 1964 C10 db on 22s
 

My Lil Man helping grandpa. The vette rear independent and a little shine and some MWDF love

Re: 1964 C10 db on 22s
 

Next gen hot rodder

Re: 1964 C10 db on 22s
 

My Cell # 641-891-3400 I'm retired so I have pretty good hours! Just give me a shout when you know what day your coming up. Ray

Re: 1964 C10 db on 22s
 

Cool build!

Re: 1964 C10 db on 22s
 

That's a beauty setup. The front will get miles o lift. I'm definatly watching this one. Love the wheels. Nothing better than tucking more than half the lug.

Re: 1964 C10 db on 22s
 

Ya the front is the 01 silverado stub it should lift great and drive like a dream