77 Cheyenne swb air ride accuair
1 Attachment(s)
This is my buddy Ryan's 77 c10.He bought a Extensive kit and Accuair for it.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Today we put the front bags on pretty simple we wanted to get a bit further but just did not happen rained ect.Top plate bag cup in place bump stop drilled and air hammered off.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Pic of it down.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Still need to cut out inner fenders but looking better.
Jake |
Re: 77 Cheyenne swb air ride accuair
Great looking truck!
|
Re: 77 Cheyenne swb air ride accuair
Sweet. Can't wait to see it finished.
|
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Thanks guys.Yea he has a nice rust free big block truck it was a great find for him.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Cut very minimal out of the inner fenders.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
We got the bed off looks like next weekend were gona put the back kit on.
Jake |
Re: 77 Cheyenne swb air ride accuair
Nice, I've been waiting for someone to do a rear ekstensive kit. More more
|
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Quote:
Jake |
Re: 77 Cheyenne swb air ride accuair
Looks good
|
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Got some of the rear done still have more to do.This pic is at their suggested ride height so that is how we set up the center ect.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Put the bag brackets to get the maximum drop with the 22s and max out the notch.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Other side has a huge gap we have to make a filler for.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
And all the way maxed out on the notch.
Jake |
Re: 77 Cheyenne swb air ride accuair
looks good!!! I plan on using that kit on the rear of mine....just a lil tip might want put a heim joint on the end of that panhard bar that connects to the c notch because your gona get some flex right there when you go up n own etc
|
Re: 77 Cheyenne swb air ride accuair
looks good!
|
Re: 77 Cheyenne swb air ride accuair
Thanks guys its their kit I am just putting it on how they suggest.He might end up getting a porter built drop member at some point that's why I wanted to make sure the rear would sit down.I will get some pics of the int he did a great job of redoing it factory style but with a custom covered bench.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
He also put Dakota digital gauges in it.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
And the 502 with AC.its an old pic of when we put in the msd and rpm air gap intake Biggs stage 3 Holley 750.he has since cleaned up the wiring ect.
Jake |
Re: 77 Cheyenne swb air ride accuair
Man that motor looks GOOD!
|
Re: 77 Cheyenne swb air ride accuair
wow! looks great !
more pics please! |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
Got the rest of it welded up.
Jake |
Re: 77 Cheyenne swb air ride accuair
1 Attachment(s)
He pulled it out for a pic.My part is done till we pancake the cross.He should be busy running air lines wires for the accuair sensors grinning off the back hangers ect.
Jake |
All times are GMT -4. The time now is 08:28 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com