The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   CA Parting 68 Suburban (https://67-72chevytrucks.com/vboard/showthread.php?t=627223)

cheyenne shortstep 05-01-2014 12:05 PM

Parting 68 Suburban
 
5 Attachment(s)
This thing is rough, fenders, hood, tailgate and front doors are smashed, liftgate is slightly bowed but no rust. Soft-Ray glass, working ram assist steering, truck runs and drives with 350 4spd. Let me know what you need.
No PM's, please keep it in thread to avoid confusion.

1972 Jimmy 05-01-2014 01:42 PM

Re: Parting 68 Suburban
 
How much for the rear interior panel chrome trim? Shipped to 48623. Does it have a tach gage cluster or front carpet strip?
Thanks eric

haskell 05-01-2014 03:21 PM

Re: Parting 68 Suburban
 
Does it have the little steel cover piece that goes between the two rear panels on the drivers side? Shipping to 46240

Thanks

uncle 05-01-2014 03:45 PM

Re: Parting 68 Suburban
 
How are rear door panels? (3rd and dead door). Orig carb/choke and air cleaner?

ddman6 05-01-2014 04:52 PM

Re: Parting 68 Suburban
 
How's the rear bumper. How much shipped to 78727?

Dewayne

diver 05-01-2014 08:25 PM

Re: Parting 68 Suburban
 
i will take air filter if no dents zip 30141, how to pay

diver 05-01-2014 08:29 PM

Re: Parting 68 Suburban
 
i will take air cleaner if no dents ship 30141

47thriftmaster 05-01-2014 09:00 PM

Re: Parting 68 Suburban
 
I'll get in line on the air intake if not pitted, dents ok. Thanks

cheyenne shortstep 05-01-2014 09:28 PM

Re: Parting 68 Suburban
 
5 Attachment(s)
72Jimmy- the rear panel retainers are straight but need clean up with steelwool or SOS. I have a factory tach. cluster with one burnt strip on the circuit board that is for the light and no wire harness, the carpet hold down strip needs rechrome and has a slight bow in it. I'll package deal you at $325 shipped.

haskell- is this what your after? If so $15 shipped.

uncle- here is the dead door panel, other side is much worse, here is the air cleaner that is on the truck not sure if this is correct, a couple very slight dents and three 10/32 screw holes, non-original carb./choke.

ddman6- rear bumper sold local, and it was rough.

diver- uncle has first dibs on air cleaner then you're up.

cheyenne shortstep 05-01-2014 09:35 PM

Re: Parting 68 Suburban
 
4 Attachment(s)
Mo' pics.

paul mora 05-01-2014 09:50 PM

Re: Parting 68 Suburban
 
How much for the steering wheel and is it cracked

diver 05-01-2014 09:52 PM

Re: Parting 68 Suburban
 
any nice am 67-72 radio

Arrington01 05-01-2014 10:02 PM

Re: Parting 68 Suburban
 
I need a original telescope antenna do you have one? I might be interested in tach dash. How much is it?

72MARIO 05-01-2014 10:43 PM

Re: Parting 68 Suburban
 
Does it have the factory jack and tire wrench ?

too much stuff 05-01-2014 11:03 PM

Re: Parting 68 Suburban
 
How much for the choke delete on the cluster?

Dirt's72 05-02-2014 12:09 AM

Re: Parting 68 Suburban
 
How is the shifter boot and ring? Is the washer bottle and bracket any good?

1972 Jimmy 05-02-2014 06:21 AM

Re: Parting 68 Suburban
 
Will take them all! PM Sent!!
Quote:

Originally Posted by cheyenne shortstep (Post 6655624)
72Jimmy- the rear panel retainers are straight but need clean up with steelwool or SOS. I have a factory tach. cluster with one burnt strip on the circuit board that is for the light and no wire harness, the carpet hold down strip needs rechrome and has a slight bow in it. I'll package deal you at $325 shipped.


uncle 05-02-2014 07:25 AM

Re: Parting 68 Suburban
 
Thx for close up pics. I'm gonna pass.

xman 05-02-2014 09:17 AM

Re: Parting 68 Suburban
 
how is the right rear quarter. dont care about dents as long its not rusted out

haskell 05-02-2014 09:31 AM

Re: Parting 68 Suburban
 
Yes, that blue piece is just what I am after. I will take it. Please pm with payment preferences.

Tim

haskell 05-02-2014 09:40 AM

Re: Parting 68 Suburban
 
I am interested in all door panels. Front, middle and back shipped to 46240. Or whatever is left behind anyone who has already posted.

There did not seem to be any giant rips or holes. Say, not worse than the middle door pics.

If you want to leave shipping open just let me know what you might estimate and we could run with actual cost plus packaging.

waylonbud 05-02-2014 10:02 AM

Re: Parting 68 Suburban
 
Hello, I would be interested in the tailgate latch or at least the spring behind the button. Maybe shoot me a price on the whole gate latch button and well go from there. Thank you.

cheyenne shortstep 05-02-2014 12:55 PM

Re: Parting 68 Suburban
 
3 Attachment(s)
Diver - air cleaner assy $65 shipped, no radio's at the moment.

xman- 1/4 panels are RUSTY.

haskell- do you want just door panels or all int. panels? Right front is missing, right rear door is real bad, rears are so-so. I will get them all pulled and take pics.

waylonbud- no tailgate button at all.

72Mario- no jack/handle

too much stuff- this is all that is there of choke delete. PM sent.

Dirt's 72- here is the shift boot and ring, boot is nice, no cracks, ring same. I have washer bottles and brackets, will dig up the best and can do $45 shipped for it all.

paul mora- steering wheel is cracked and has chunks missing. $50 shipped.

diver 05-02-2014 02:33 PM

Re: Parting 68 Suburban
 
pm me thanks,looking to buy stepside rear fender 67-72 with cut out.

bondo510 05-02-2014 05:33 PM

Re: Parting 68 Suburban
 
How is the rear seat area rubber floor mat? I need a nice one. I need a front one to but with no shifter holeo


All times are GMT -4. The time now is 12:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com