The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 22 1 2345611 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   Blake's 67 GMC stepside build (https://67-72chevytrucks.com/vboard/showthread.php?t=655780)

reaper71 01-09-2015 08:43 PM
Blake's 67 GMC stepside build
 
2 Attachment(s)
Hey Guy's, here is another build I started back in 2012 for a Guy in Arkansas.
It's a 67 GMC stepside (farm truck highly used) The plan was to replace suspension, drive train,interior,paint etc,etc...This has been going on and off for around 2yrs (at times no work done for 7mnths) Well the time has come, He finally pulled the trigger to finish the old girl so I will get the build started..

First few pics are as it rolled into the shop..
Hope you enjoy the ride..

Mark...

reaper71 01-09-2015 08:47 PM
Re: Blake's 67 GMC stepside build
 
2 Attachment(s)
A few more...
As you can see from the 2nd pic. the drivers door was severely damaged..
It will need to be replaced..

reaper71 01-09-2015 08:51 PM
Re: Blake's 67 GMC stepside build
 
2 Attachment(s)
Last 2 pics for now...of the interior and the engine bay.

Just a side note this was his Dad's truck and was given to him before he passed so their is a huge attachment to the truck for him.
Till next time.

Mark...

68shortwide 01-09-2015 10:57 PM
Re: Blake's 67 GMC stepside build
 
That's awesome.

el_bole 01-09-2015 11:04 PM
Re: Blake's 67 GMC stepside build
 
Love those 67's especially GMC's...Nice truck man.

special-K 01-10-2015 09:12 AM
Re: Blake's 67 GMC stepside build
 
Nice one to start with. Is he going all '67 look, no side markers?

reaper71 01-10-2015 09:05 PM
Re: Blake's 67 GMC stepside build
 
Thank's Guy's for checking out the build...

reaper71 01-10-2015 09:09 PM
Re: Blake's 67 GMC stepside build
 
To Answer that? Yes No side markers I will keep the sides very clean looking..

Mark...
Quote:
Originally Posted by special-K (Post 6993672)
Nice one to start with. Is he going all '67 look, no side markers?

Fitz 01-11-2015 09:22 AM
Re: Blake's 67 GMC stepside build
 
Quote:
Originally Posted by reaper71 (Post 6993092)
Hey Guy's, here is another build I started back in 2012 for a Guy in Arkansas.
It's a 67 GMC stepside (farm truck highly used) The plan was to replace suspension, drive train,interior,paint etc,etc...This has been going on and off for around 2yrs (at times no work done for 7mnths) Well the time has come, He finally pulled the trigger to finish the old girl so I will get the build started..

First few pics are as it rolled into the shop..
Hope you enjoy the ride..

Mark...
A three pedal, four eyed, slant nose stepside. That thing just makes my heart go pitter-pat! Congrats, man. That's going to make a fine project IF you waste the Patina and toss in a BIG BLOCK!

that_red_c10 01-11-2015 09:46 AM
Re: Blake's 67 GMC stepside build
 
Wow! Such a beautiful truck!! cant wait to see updates :)

reaper71 01-11-2015 11:53 AM
Re: Blake's 67 GMC stepside build
 
FITZ.....This truck will be a mix between a Daily driver/cruise in kinda build. The owner want's it to be really clean but with some custom touches..

Engine wise it will be a 5.3L 4l60E combo and smoothed out body and full paint..

Mark...

that_red_c10 01-11-2015 11:55 AM
Re: Blake's 67 GMC stepside build
 
That's nice! is it going to stay white? or is it going to change color?

reaper71 01-11-2015 11:56 AM
Re: Blake's 67 GMC stepside build
 
Thank's red C10!! If you guys could only have seen this old girl in person it is really rough!!! (But I can bring her back to her former glory)
Quote:
Originally Posted by that_red_c10 (Post 6998635)
Wow! Such a beautiful truck!! cant wait to see updates :)

that_red_c10 01-11-2015 12:00 PM
Re: Blake's 67 GMC stepside build
 
No problem! I wish I could. I want to look for a 67/68 c10-c30 or GMC, in addition to my 68'. I want one in one of the darker colors though. something like dark Blue, dark Green, or Vermilion. id maybe go up to a 69-72 but I really like the 67/68 look in these colors. and if I get any of them I want them with white trim, not chrome. Just gotta start saving up haha!

reaper71 01-11-2015 12:08 PM
Re: Blake's 67 GMC stepside build
 
5 Attachment(s)
Pic #1. The spring straps were broken on both sides and this is what it looked like the last time they drove it!!
Pic #2. A FRICKIN HOSE CLAMP!!!!!
Pic #3. The fenders coming off..
Pic #4. The bed finally removed...(reason I say this it had about 100lbs of junk in the bed we removed)
Pic #5. another look at the (High Tech Hose Clamp!!!) :me:

that_red_c10 01-11-2015 12:12 PM
Re: Blake's 67 GMC stepside build
 
LMAO that hose clamp is hysterical!! but the frame doesn't look too bad for sitting! I cant wait to start my frame-off restoration. my truck is ghetto too LMAO. The previous owner zip-tied one of the exhaust pipes to the frame because it broke off LMFAO.

reaper71 01-11-2015 09:18 PM
Re: Blake's 67 GMC stepside build
 
There is all kinds out there!!! :dum:

tcrist 01-11-2015 09:42 PM
Re: Blake's 67 GMC stepside build
 
67??? with side marker lights and 5 lug?

special-K 01-12-2015 07:37 AM
Re: Blake's 67 GMC stepside build
 
Quote:
Originally Posted by tcrist (Post 6999585)
67??? with side marker lights and 5 lug?
...and sloped hood...hand brake? My guess is either the fenders were changed or it's actually a '68. Obviously, the 5-lugstuff has been swapped-in (or a 67-68 cab was swapped-on to a 71/72). I figure no matter how it started life it's going to be (or appear to be) a '67 fenderside when done. I'm also building a '67 GMC that started off as many other trucks from 67-72 ('71 frame). How about those grille letters

reaper71 01-12-2015 11:10 AM
Re: Blake's 67 GMC stepside build
 
Ok Guy's!
Yes it has things that scream 68...The Cab and title say 67...it also came from the factory with a V6,drum brakes and 3 on the tree....
The front and rear suspension was swapped years ago for 71-72 and a small block.
At the end of the day 99% of us will change things to fit our taste...
The truck is 48 yrs old (you have changed alot in 48 yrs too..Right?)

reaper71 01-12-2015 11:17 AM
Re: Blake's 67 GMC stepside build
 
3 Attachment(s)
Here is some shots of bed,inner fender and some Rot to be removed and repaired..

reaper71 01-12-2015 11:21 AM
Re: Blake's 67 GMC stepside build
 
2 Attachment(s)
Pic #1. The core support, pretty Bad so will need some major TLC...
Pic #2. The front end showing some of the nasty stock components and clutter that WILL go away..

reaper71 01-12-2015 11:43 AM
Re: Blake's 67 GMC stepside build
 
correction!!
Straight 6 and 73-87 suspension components

Low Elco 01-12-2015 02:22 PM
Re: Blake's 67 GMC stepside build
 
If it's like any of your other stuff, it's gonna be neat. Good luck!

oldman3 01-12-2015 10:53 PM
Re: Blake's 67 GMC stepside build
 
Quote:
Originally Posted by special-K (Post 6999990)
...and sloped hood...hand brake? My guess is either the fenders were changed or it's actually a '68. Obviously, the 5-lugstuff has been swapped-in (or a 67-68 cab was swapped-on to a 71/72). I figure no matter how it started life it's going to be (or appear to be) a '67 fenderside when done. I'm also building a '67 GMC that started off as many other trucks from 67-72 ('71 frame). How about those grille letters
Special K, the sloped hood was standard on the 67 and the 68 models. The letters in the grill are only on the 67, all others where on the hood. Picked up some of this info from this site. http://www.pattson.com/maych/67_72_gmc.htm ...Jim


All times are GMT -4. The time now is 03:20 PM.
Page 1 of 22 1 2345611 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com