The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   #1 plug wire issue (https://67-72chevytrucks.com/vboard/showthread.php?t=670952)

1979-square-body 05-17-2015 05:13 PM
#1 plug wire issue
 
I got some extended wires and realized my headers are routed right over the #1 plug. What do I do now!?

RIDE-RED 350r 05-17-2015 07:42 PM
Re: #1 plug wire issue
 
90 degree plug cap and heat resistant socks...

Amazon.com: Spark Plug Ignition Wire High Heat... Amazon.com: Spark Plug Ignition Wire High Heat...

1979-square-body 05-17-2015 08:54 PM
Re: #1 plug wire issue
 
Quote:
Originally Posted by RIDE-RED 350r (Post 7175930)
Would work in theory... But the 90 degree plug on there sits on the header. Like without the wire, there is a gap of less than a quarter inch between the plug tip and the header. I just got this truck a few weeks ago and just started to do some work on it.

geezer#99 05-17-2015 09:02 PM
Re: #1 plug wire issue
 
Get shorty plugs!
http://www.summitracing.com/int/sear...20spark%20plug

RIDE-RED 350r 05-17-2015 09:56 PM
Re: #1 plug wire issue
 
Roger that. Must be the headers you have hug the block a bit closer than mine do.

1979-square-body 05-17-2015 10:15 PM
Re: #1 plug wire issue
 
Yeah I've never seen a set of headers that sat on the plug. I think to change the plugs, I'll need to take the headers off...

I'm gonna look into the wrap and the shorty plugs just to be safe!

Thanks guys!!


All times are GMT -4. The time now is 07:14 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com