The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   TX WTS OEM 12 bolt differential cover (https://67-72chevytrucks.com/vboard/showthread.php?t=676357)

Jake1971 07-12-2015 11:41 AM
WTS OEM 12 bolt differential cover
 
2 Attachment(s)
I have this OEM cover that has surface rust on the outside and clean inside I removed recently from a 1968 c-10 truck, the outer tip was slightly bent somehow but it does not affect the seal or functionality. See photos. $20 plus the ride. I can throw in the 12 bolts with it. LMK.

Attachment 1424617

Attachment 1424618

Jake1971 07-15-2015 06:59 PM
Re: WTS OEM 12 bolt differential cover
 
Ttt

Jake1971 07-18-2015 12:40 PM
Re: WTS OEM 12 bolt differential cover
 
Bump. Offers?

Jake1971 07-20-2015 06:32 PM
Re: WTS OEM 12 bolt differential cover
 
Ttt

Jake1971 07-31-2015 06:54 PM
Re: WTS OEM 12 bolt differential cover
 
bump

71CHEVYSHORTBED402 08-01-2015 12:47 AM
Re: WTS OEM 12 bolt differential cover
 
If the edge is just bent, not cut, or the very edge damaged, then a small crescent wrench should do the trick. At least it did last night.

The bend is from a floor jack.

Jake1971 08-01-2015 03:02 PM
Re: WTS OEM 12 bolt differential cover
 
Quote:
Originally Posted by 71CHEVYSHORTBED402 (Post 7260116)
If the edge is just bent, not cut, or the very edge damaged, then a small crescent wrench should do the trick. At least it did last night.

The bend is from a floor jack.
That's what it appears to be.


All times are GMT -4. The time now is 06:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com