Kents 62 knock out knee knocker
3 Attachment(s)
I'm posting this for my pops. What started out as a "flip truck" and a "rat build" took a quick turn. Having fallen in love with these ugly trucks It wasn't as easy to let go of. He acquired the truck in a trade and decided to build it for a fast flip. He decided to fix the rust and 200 hours later it has all new everything.
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
The frame matched the cab pretty well. It was pretty nasty so it was sent out for blasting and then base and cleared
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
It cleaned up a lot better than we thought
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
what rot was in the frame was removed and repaired. which you will see later was then removed later haha.
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
He based and cleared the frame it looks killer at this point haha
|
Re: Kents 62 knock out knee knocker
1 Attachment(s)
new drop spindles for the disc brakes
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
the stock dash was yanked and a 59 impala dash was then fitted into the truck. which looks like an easy fit.... well its not. But it is so worth the pain
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
More of the dash swap
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
The roof on the 62 had too many pin holes for his liking. lucky enough the roof that came on the bbw donor panel was rust free.
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
a girls gotta run, steer, and stop. so we fitted it with an LS.
|
Re: Kents 62 knock out knee knocker
3 Attachment(s)
broke out the tube bender and made a mount for the 49 chevy tank
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
The underside and the firewall were cleaned up
|
Re: Kents 62 knock out knee knocker
2 Attachment(s)
gas tank mounts removed and we reinforced the rear cab pan
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
now that the firewall was smoothed out and the bottom as well the fun starts
|
Re: Kents 62 knock out knee knocker
3 Attachment(s)
the bottom painted black and the cab got another coat of primer
|
Re: Kents 62 knock out knee knocker
5 Attachment(s)
The cab is ready.
|
Re: Kents 62 knock out knee knocker
4 Attachment(s)
Simple on the outside bright on the inside.
|
Re: Kents 62 knock out knee knocker
2 Attachment(s)
Lil man stopped by to help out B-Pa on his truck for a bit
|
Re: Kents 62 knock out knee knocker
3 Attachment(s)
a few more of the paint process
|
Re: Kents 62 knock out knee knocker
id like to see more of the Gas tank install!
|
Re: Kents 62 knock out knee knocker
WOW.. nice workmanship.. Nice booth... First time I've seen a dash replacement like that one
|
Re: Kents 62 knock out knee knocker
Great build. Subscribed
Wade |
Re: Kents 62 knock out knee knocker
I'm digging the direction your going with this truck , got a bbw 63 in the yard
|
Re: Kents 62 knock out knee knocker
What year is the frame? A 62 should've had the torsion bar front and "X frame"
And yours looks like a 63-66 frame Wade |
Re: Kents 62 knock out knee knocker
Ya we switched over to a 66 frame. the X is just too much of a pain in the ass.
I will grab a few more piks of the gas tank install here in a bit. |
All times are GMT -4. The time now is 04:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com