The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Classifieds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=247)
-   -   FS: Pacesetter TrailBlazer SS Headers (https://67-72chevytrucks.com/vboard/showthread.php?t=691792)

SMKN TA 95 12-16-2015 04:38 PM

FS: Pacesetter TrailBlazer SS Headers
 
Up for sale are a set of Trailblazer SS headers from Pacesetter. These are ceramic coated, 1.75" tubes with a 3" collector.

Buyer to pay shipping and paypal fees.

I can be contacted via PM's, or email smknta95@hotmail.com or call/text 815-866-6195.

$380

Trailblazer LS1 PaceSetter Headers
- 1.75" Full Long tube Headers
- 3" collector
- Ceramic Coated
- O2 Sensor bungs
- Works great in C10's for LS header swaps, just need minor trim of lower frame rail lip depending on location of engine.

Price - $380 plus shipping

http://i640.photobucket.com/albums/u...psmbymh8q2.jpg

http://i640.photobucket.com/albums/u...psgq7oe1t0.jpg

http://i640.photobucket.com/albums/u...psjf1wfkby.jpg

juddss 12-18-2015 11:26 PM

Re: FS: Pacesetter TrailBlazer SS Headers
 
So you think id have to trim my frame to make these fit on my 70 suburban ls swap

SMKN TA 95 12-19-2015 02:55 PM

Re: FS: Pacesetter TrailBlazer SS Headers
 
Yes, very minor trimming with a grinder or cutoff wheel if needed. That all depends also on engine setback too.

SMKN TA 95 12-22-2015 09:03 AM

Re: FS: Pacesetter TrailBlazer SS Headers
 
Pending sale as of right now.

davidfre21 12-25-2015 12:40 AM

Re: FS: Pacesetter TrailBlazer SS Headers
 
Do they hang below the frame rails?

HONDAWASAKI 12-29-2015 01:11 AM

Re: FS: Pacesetter TrailBlazer SS Headers
 
In line for the headers.

SMKN TA 95 12-29-2015 10:26 AM

Re: FS: Pacesetter TrailBlazer SS Headers
 
4 Attachment(s)
Found some pictures of the same headers another member installed in his truck. I have not installed this as the directions changed mid build.

HONDAWASAKI 12-30-2015 01:15 AM

Re: FS: Pacesetter TrailBlazer SS Headers
 
Still available?

russellrox 03-15-2016 05:46 PM

Re: FS: Pacesetter TrailBlazer SS Headers
 
Anyone else try the pacesetter long tubes out of an Fbody

juddss 03-16-2016 04:32 PM

Re: FS: Pacesetter TrailBlazer SS Headers
 
Thought I read somewhere they don't fit well. I have been researching this for months. I have owned pacesetter armor coated headers. They look good at first then start rusting on the welds. They are also not coated on the inside. Think im going to get Gibson performance stainless ceramicoated headers. They are coated on the outside and inside. At least that's what they told me when I called Gibson today. Lifetime warrenty against rusting out and cracks also . Only 200 more dollars with the 50 dollar rebate than the pacesetters. I plan on owning this suburban for a long time. I only want to do it once.

juddss 03-16-2016 04:32 PM

Re: FS: Pacesetter TrailBlazer SS Headers
 
http://www.summitracing.com/parts/gib-gp139s-c


All times are GMT -4. The time now is 02:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com