Pulling some NOS bed trim.....wants/needs?
 

I've got a short supply of long and short fleet side NOS trim bed trim available along with a couple tailgate sets. I can post stuff once I know if anybody needs anything. These are some pretty long trim pieces so shipping will be oversized #1 I'm sure due to length. These are very hard to find!

Hopefully this isn't breaking any board rules but I don't get this stuff out often and its a pita to sort through....everything still in GM wrappers. I've got a project of my own so while I'm digging through my stuff for my truck......might as well see who needs what.

Re: Pulling some NOS bed trim.....wants/needs?
 

And no 1977 NOS stuff....plenty of used tho.

Re: Pulling some NOS bed trim.....wants/needs?
 

Couple pics....

Re: Pulling some NOS bed trim.....wants/needs?
 

You have passenger fender including wheel well and passenger door in 77?

Price + shipped to 98223

Re: Pulling some NOS bed trim.....wants/needs?
 

Looking for 72 SWB upper bed trim, both sides. If you have it how much?
Thanks
Kirk

Re: Pulling some NOS bed trim.....wants/needs?
 

I believe I do....by wheel well are you referring to the lip opening in NOS?

Re: Pulling some NOS bed trim.....wants/needs?
 

I do have them....do you need any other trim? I checked quick to see what else I had for 67-72-I have NOS sport mirrors, some wide black trim, lots of woodgrain wide trim, tailgate handle eyebrow trim, side markers, turn signals, back up lenses, wheel lip openings, etc.

Re: Pulling some NOS bed trim.....wants/needs?
 

Yes lip opening, I'll take anything thats driver quality with no major dents/damage, small dings are fine, if all you have is NOS give me a price.

Re: Pulling some NOS bed trim.....wants/needs?
 

Any chance you have a bowtie grille emblem for a 77?

Re: Pulling some NOS bed trim.....wants/needs?
 

Ok...let me check. The only bowtie emblems I have NOS are the metal versions-not foil....it that what you need?

Re: Pulling some NOS bed trim.....wants/needs?
 

Here is the version I still have....and I only have 2 left.

Re: Pulling some NOS bed trim.....wants/needs?
 

How much? shipped to 98223

Re: Pulling some NOS bed trim.....wants/needs?
 

I'd let one go for $110 shipped. I'll PM you my info.

Re: Pulling some NOS bed trim.....wants/needs?
 

All I need are the upper bed trim pieces. How much shipped to 85225 ?

Thanks
Kirk

Re: Pulling some NOS bed trim.....wants/needs?
 

GMACHINZ

Do you put the trim in a shipping tube when you send it?

And do you ship to Canada?

If so, how much on the set of LWB upper bed trim moldings?

Thank you.
David

Re: Pulling some NOS bed trim.....wants/needs?
 

A tube or a long box....shipping on something like that is gonna hurt $$/wise tho. I'll try to get a quote just the same for you.

Re: Pulling some NOS bed trim.....wants/needs?
 

Ok, let me know. Thank you.



Something I have found works great and is super safe (and inexpensive to buy)
is cardboard tubes used for making cement posts, etc from Home Depot, etc.


Do you have any stuff for the 88-91 R/V Series ?

Thank you.
David

Re: Pulling some NOS bed trim.....wants/needs?
 

Do you have any nos trim for 73-75 K5 Blazer?

Re: Pulling some NOS bed trim.....wants/needs?
 

What years is this correct for?

Re: Pulling some NOS bed trim.....wants/needs?
 

I believe its for 75-80 Silverado.

Re: Pulling some NOS bed trim.....wants/needs?
 

Looking for door trim, upper and lower, passenger and driver for a 79 K25. Any in your stock?

Re: Pulling some NOS bed trim.....wants/needs?
 

Yes I do....I have quite a few trim pieces to pull and get pics for....I'll post pics soon hopefully....harness work is keeping me busy!!

Re: Pulling some NOS bed trim.....wants/needs?
 

OK, Thanks. The p/n's should be 475559, 475560, 475543, 475544. And this Spring I'll be in the market for PW and PDL harnesses as I'll be converting my manuals to power. What is the price for those, with one touch up PW option (for a pick-up)?

Re: Pulling some NOS bed trim.....wants/needs?
 

Ok...let me check. On the express conversion, are u doing newer doors (1981-up?) Or 80-older power doors?

Re: Pulling some NOS bed trim.....wants/needs?
 

I'm going with 77-80 power door set-up. BTW, while you are looking, would you have any of the brushed aluminum interior door panel trim inserts?