72 Blazer for parts
 

For parts in Mesa az


Rollbar $400

350/auto/205

Body has rust, PO has cut off the rocker boxes, Tail gate is repro junk.

Thanks,
Tom

Re: 72 Blazer for parts
 

How much for the tilt and bolt in hump?
Also the rear splash pans for the bumper?

Re: 72 Blazer for parts
 

toomuchstuff Holding on to the tilt for a little bit, $75 for the Hump cover , $80 for the splash pans + shipping

Re: 72 Blazer for parts
 

Condition and price of door panels. Any chance it has the correct 4x4 dipstick?

Re: 72 Blazer for parts
 

If you get to where you are going to cut up the frame I would be interested in the rear frame horns.

Re: 72 Blazer for parts
 

Blue k5, I'll have to look at the door panels again, I think they're in good shape, I'll keep the frame horns in mind, although didn't plan on cutting this frame up.

Re: 72 Blazer for parts
 

Tom, I need the ebrake set-up that's under the frame. Not the cables, but all the brackets, springs, cable holders, basically all the small stuff. Oh yeah, and a Truck world seat cover...;)

Re: 72 Blazer for parts
 

Will pass on the hump, can you verify condition of the splash pans? Rust or twisted etc... Thanks.

Re: 72 Blazer for parts
 

barter for 205 stick?

Re: 72 Blazer for parts
 

What is the casting numbers on the exhaust manifolds? Also what kind of shape is the fan shroud in?

Re: 72 Blazer for parts
 

Also what is the casting number on the alternator and the date code.

Re: 72 Blazer for parts
 

interested in oil dip stick, alternator brackets and possibly power steering brackets & pump. shipped to 82210.
Thanks
Rock C

Re: 72 Blazer for parts
 

Am interested in the section of floor pan where the bucket seats and console bolt to behind the hump

Re: 72 Blazer for parts
 

I'd be interested in the radiator if a 4-row OEM Harrison pending cost shipped and condition. Any idea if usable or a repairable core? Thanks Tom. Pete

Re: 72 Blazer for parts
 

I might be interested in the Soft-Ray windshield and both door windows if they are in excellent shape (not scratched, dinged clouded or cracked).

Re: 72 Blazer for parts
 

Gas cap any good? Shipping to 37148.
Thanks

Re: 72 Blazer for parts
 

Interested in the tow hooks if any.

Re: 72 Blazer for parts
 

Is there a jack hold down bracket and spring available on the rear floor?

Re: 72 Blazer for parts
 

Interested in the door panels.

Re: 72 Blazer for parts
 

Also interested in the 3.73 gears - ring pinion yolk carriers as a backup. Thanks.

Re: 72 Blazer for parts
 

Interested in rear leveling mats if it has them

Re: 72 Blazer for parts
 

Interested in the np205 with adaptor,

Re: 72 Blazer for parts
 

Walkintall I still have the 205 & adapter $350 for them

MikeCofield No leveling mats

Deadhead Im sure I have a harrison radiator laying around I'll see if theres a good one, & I'll look for a 3.73 gear set too

Rodhart & Blue k5 the driver door panel is broke out where the finishing screw holds the panel on.

tjsblazer jack stuff is gone

hybridchevy No tow hooks

dirish Gas cap was a repop

tristan, its all soft ray glass, but it is original used glass with some scratches & etc.

stagerunner I have that section on another blazer floor how much of it did you need?

rock & rex10, sorry haven't got under the hood yet

bL.A.zer90045 Not really looking for anything in trade right now.

too much stuff I haven't got that rear bumper off yet to check the gravel guards

D Passmore, have yet to get under this to look for ebrake stuff. I have another frame for sale that may also still have those items on it.

Re: 72 Blazer for parts
 

Thank you. Let me know once you get the info.

Re: 72 Blazer for parts
 

x2