The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   NY Factory Jack Setup (https://67-72chevytrucks.com/vboard/showthread.php?t=735731)

lane224 04-17-2017 11:27 AM
Factory Jack Setup
 
1 Attachment(s)
Factory Jack Setup.
$150 + Ship

tristan 04-17-2017 12:21 PM
Re: Factory Jack Setup
 
I will take it, PM sent.

Farrgor 04-17-2017 12:38 PM
Re: Factory Jack Setup
 
Good find Tristan. Put me in line Lane if you run across another good set.

lane224 04-17-2017 12:51 PM
Re: Factory Jack Setup
 
Quote:
Originally Posted by tristan (Post 7918135)
I will take it, PM sent.
Pm'd you

mdunn 04-17-2017 01:10 PM
Re: Factory Jack Setup
 
Put me in line also! Wish I would have seen this one.

tristan 04-19-2017 05:46 AM
Re: Factory Jack Setup
 
Payment sent, thanks.

preciador6 04-19-2017 02:05 PM
Re: Factory Jack Setup
 
Does anyone have a picture of this set up on the blazer were all this goes originally ,Thanks.

craneboy72 04-19-2017 05:10 PM
Re: Factory Jack Setup
 
2 Attachment(s)
Like this?

preciador6 04-19-2017 05:14 PM
Re: Factory Jack Setup
 
ok thanks guys.:metal:

1rippen6 05-05-2017 05:16 PM
Re: Factory Jack Setup
 
1 Attachment(s)
I have a setup but the lug wrench is 3/4 but pretty sure its not correct 125 plus shipping.

Cheyennekid 05-06-2017 10:49 AM
Re: Factory Jack Setup
 
Do u still have the jack setup 1rippen6 if so pm me

1rippen6 05-06-2017 12:33 PM
Re: Factory Jack Setup
 
Quote:
Originally Posted by Cheyennekid (Post 7935637)
Do u still have the jack setup 1rippen6 if so pm me
PM sent

NorthernMatthew 05-09-2017 01:38 AM
Re: Factory Jack Setup
 
Do you still have a jack by itself?

1rippen6 05-09-2017 07:56 AM
Re: Factory Jack Setup
 
Quote:
Originally Posted by NorthernMatthew (Post 7937951)
Do you still have a jack by itself?
I may have another jack will have to look but let lane224 response first.

lane224 05-09-2017 10:14 AM
Re: Factory Jack Setup
 
Quote:
Originally Posted by 1rippen6 (Post 7938029)
I may have another jack will have to look but let lane224 response first.
Only jacks I have right now are out of 73-75. Hopefully Dwayne has one hidden somewhere.

1rippen6 05-09-2017 12:01 PM
Re: Factory Jack Setup
 
I will look tomorrow for a jack

1rippen6 05-10-2017 09:28 PM
Re: Factory Jack Setup
 
2 Attachment(s)
Quote:
Originally Posted by NorthernMatthew (Post 7937951)
Do you still have a jack by itself?
I found another one was rusty so I blasted it. It does have some pitting on the one side and bottom but shouldn't affect it. Its the one with the etching primer. 40 plus shipping should fit in a medium flat rate for 13.

NorthernMatthew 05-11-2017 12:59 AM
Re: Factory Jack Setup
 
Thanks a lot -- so that's the correct jack for a 72 Blazer and it works properly?

1rippen6 05-11-2017 07:41 AM
Re: Factory Jack Setup
 
Quote:
Originally Posted by NorthernMatthew (Post 7939845)
Thanks a lot -- so that's the correct jack for a 72 Blazer and it works properly?
Yes should be correct as far as working properly it goes up and down fine. I can throw it under the K5 I have setting in the yard and check it out if you like.

NorthernMatthew 05-15-2017 11:04 PM
Quote:
Originally Posted by 1rippen6 (Post 7939919)
Yes should be correct as far as working properly it goes up and down fine. I can throw it under the K5 I have setting in the yard and check it out if you like.
Thank you - I tried to reply earlier but didn't do it right. I'm looking for the correct 72 Blazer Jack so if you need to try it under yours to confirm, I'd really appreciate that. You don't have any proper levers I don't suppose hey?
Posted via Mobile Device

1rippen6 05-16-2017 07:25 AM
Re: Factory Jack Setup
 
Actually looking for other parts in the last couple of days I found a handle and another lug wrench. I will post a picture later this evening I have plans right after work. It will be a setup as pictured above 150 plus shipping for everything. I don't think I want to separate at this time, I will give you first shoot and then mdunn next.

NorthernMatthew 05-16-2017 04:53 PM
Quote:
Originally Posted by 1rippen6 (Post 7943916)
Actually looking for other parts in the last couple of days I found a handle and another lug wrench. I will post a picture later this evening I have plans right after work. It will be a setup as pictured above 150 plus shipping for everything. I don't think I want to separate at this time, I will give you first shoot and then mdunn next.
Posted via Mobile Device

NorthernMatthew 05-16-2017 04:54 PM
Quote:
Originally Posted by 1rippen6 (Post 7943916)
Actually looking for other parts in the last couple of days I found a handle and another lug wrench. I will post a picture later this evening I have plans right after work. It will be a setup as pictured above 150 plus shipping for everything. I don't think I want to separate at this time, I will give you first shoot and then mdunn next.
I think I have the correct handle, can you do me a favor and measure the two lengths please?
Posted via Mobile Device

1rippen6 05-16-2017 08:47 PM
Re: Factory Jack Setup
 
1 Attachment(s)
Here is the stuff I found lug wrench long side about 15 3/4 short side 4 5/8

chevycc1970 05-16-2017 10:31 PM
Re: Factory Jack Setup
 
Quote:
Originally Posted by 1rippen6 (Post 7944547)
Here is the stuff I found lug wrench long side about 15 3/4 short side 4 5/8
I'll get in line as well.


All times are GMT -4. The time now is 01:40 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com