The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   AR 72 GMC Grande part out (https://67-72chevytrucks.com/vboard/showthread.php?t=741778)

Jens Jimmy 07-05-2017 09:47 PM

72 GMC Grande part out
 
5 Attachment(s)
I am closing this thread, due to my lack of time to properly take care of the part requests. I will get everyone's orders shipped and follow up on everything to date.
My work schedule went to 60 hour weeks, shortly after I listed these parts. I don't want to keep people waiting, and not be able to respond to them in a timely matter.
If we have set anything up, please don't hesitate to PM me, I am pulling parts today and getting the orders ready to ship.
I will re list the rest of the parts, when things get back to normal and I can fulfill the obligation.
Thanks everyone that has ordered , see everyone soon
Mike


Ok, starting this thread over. I was looking to sell the entire truck, but looks like there is much more interest in the parts.
This is a complete truck that will be parted if you don't see what you are looking for, just ask.
Pair of bucket seats complete with all factory mounting brackets and console, sold all together 900.00 plus the ride, can ship via bus .
Black steering wheel with some cracks, includes horn cap 65.00 plus ride.
Front chrome bumper is straight, but has patina surface rust 50.00
Front bumper guards 65.00 shipped con us
Tilt steering column inc. tilt lever, ts lever and gear shift. chrome is weak on levers, gearshift is surface rusty. 275.00 plus ride. [SOLD"]
GMC hood letters 35.00 shipped con us
Wood grain instrument cluster bezel 45.00 shipped conus. ATOG is first up on bezel (SOLD)
All A/c components, excluding compressor and brackets on motor. Everything else under hood, under dash, to include vent housings, cables, control etc. 200.00 plus ride. Buyer will have right to opt out, if I find rust issues when I pull it.
Nice tail light lenses with blue dots ,20.00 shipped (SOLD)
Parchment sun visors, 45.00 shipped conus
OEM wiper arms, blades need replaced, 27.50 shipped conus
Brake booster and master cylinder, 50.00 plus ride
A/C Battery box no rust very good condition 50.00 Plus ride
Pair of hood hinges, good condition 45.00 plus ride
72 Gas pedal assy. with cable and deluxe trim on pedal, 45.00 plus ride
GMC hood latch /grill support, 35.00 plus ride
GMC front turn signal lights and housings complete 40.00 pair shipped
I will be listing more, as I get it tore down. Let me know if there is anything you need, and I will list it per forum rules, with price

Jens Jimmy 07-05-2017 09:50 PM

Re: 72 GMC Grande part out
 
5 Attachment(s)
More pics

1rippen6 07-05-2017 09:56 PM

Re: 72 GMC Grande part out
 
I will get inline on the dash bezel, what shape is the wood grain on the door panel inserts interested pending price and shipping to 17225

orange71 07-05-2017 09:58 PM

Re: 72 GMC Grande part out
 
How much for all the steering column brackets shipped to 92509?

Jens Jimmy 07-05-2017 10:06 PM

Re: 72 GMC Grande part out
 
1rippen, the woodgrain doors are about normal, showing wear around the window cranks. 47.00 to your door

1rippen6 07-05-2017 10:07 PM

Re: 72 GMC Grande part out
 
Quote:

Originally Posted by Jens Jimmy (Post 7984252)
1rippen, the woodgrain doors are about normal, showing wear around the window cranks. 47.00 to your door

Could I get a couple of pictures, in no big hurry will wait to see if Atog passes on the guage bezel, is it OEM?

too much stuff 07-05-2017 10:12 PM

Re: 72 GMC Grande part out
 
Glove box door?

Jens Jimmy 07-05-2017 10:33 PM

Re: 72 GMC Grande part out
 
orange, you say all of the s.c. brackets, are you referring to the two under the dash and the one under the hood? That is all I can think of off the top of my head. If that is what you are needing, 29.00 will get then to your door

Jens Jimmy 07-05-2017 10:35 PM

Re: 72 GMC Grande part out
 
Hey Too Much, Good to hear from ya. I am using that glovebox cover on my GMC.

atog 07-05-2017 10:39 PM

Re: 72 GMC Grande part out
 
Mike I'll take bezel as long as there is no cracks and you don't ship it with them old Trojan wrappers. I'm still catching hell for her finding them in the trash can last time. Not to mention I lost a good maid over that ordeal

HOTFUN 07-05-2017 10:42 PM

Re: 72 GMC Grande part out
 
Want the gas tank carpet grommets and mounting screws. Thanks, Mark

Jens Jimmy 07-05-2017 10:46 PM

Re: 72 GMC Grande part out
 
ATOG, I thought I threw her off by sending my magnum wrappers, She would HAVE to know those weren't yours..... I will get it heading your way.

Jens Jimmy 07-05-2017 10:47 PM

Re: 72 GMC Grande part out
 
Hotfun, I will check the parts in the morn. Do you need the carpet, or just the gromets and screws

PICKMUP 07-05-2017 10:49 PM

Re: 72 GMC Grande part out
 
Original clutch fan?

towbar 07-05-2017 10:50 PM

Re: 72 GMC Grande part out
 
Hi, I would be interested in the 3 groove lower pulley (crankshaft) . Also need drivers side exhaust heat shield (stove) if available and not rusty?
Price with shipping to 28753

thanks a bunch!

atog 07-05-2017 10:50 PM

Re: 72 GMC Grande part out
 
Thanks I will get you paid Heading to mailbox to wait on it now

too much stuff 07-05-2017 10:52 PM

Re: 72 GMC Grande part out
 
Quote:

Originally Posted by Jens Jimmy (Post 7984296)
Hey Too Much, Good to hear from ya. I am using that glovebox cover on my GMC.

Good to see you selling more parts again... Was starting to think atog cleaned you out!

HOTFUN 07-05-2017 10:55 PM

Re: 72 GMC Grande part out
 
Really just need all the grommets and screws as I would suspect the carpet is lightly toasted?
Are you going to sell the floor pan brace and tacked floor mounts off the cab bottom too or sell them with the seats? Thanks, Mark

Jens Jimmy 07-05-2017 10:55 PM

Re: 72 GMC Grande part out
 
PICKMUP, I will check in the morning,
TOWBAR, I will check on the pulley and heat shield
ATOG, your elevator goes down when you push the up button. Don't be standing in the rain waiting on it at the mailbox, I'm faxing it to ya!

DeadheadNM 07-05-2017 10:57 PM

Re: 72 GMC Grande part out
 
Dashpad condition cost? Side marker lamps and reverse light lenses? Thanks.

atog 07-05-2017 10:58 PM

Re: 72 GMC Grande part out
 
Easy now that's how rumors start. I need to have a garage sale to get a couple buildings freed up. I just can't say no

Gawdly 07-05-2017 11:02 PM

Re: 72 GMC Grande part out
 
what's the story on the AC compressor brackets, pulleys... all the engine brackets and pulleys?
And what about the headliner panel and trim?

DeadheadNM 07-05-2017 11:07 PM

Re: 72 GMC Grande part out
 
Could also use the screws for the fan shroud and those for the tranny inspection cover please.

Jens Jimmy 07-05-2017 11:09 PM

Re: 72 GMC Grande part out
 
HOTFUN, I will check the floor to see if its good
TOOMUCH, He bout did, he left here extremely heavy...
DEADHEAD, Dashpad is cracked
GAWDLY, AC brackets and pulleys are going to be used on my project
Headliner and trim look nice. If I can get it all pulled without breaking it, about 95.00 should get it to ya

mo 07-05-2017 11:18 PM

Re: 72 GMC Grande part out
 
Bullseye reverse lenses shipped to 93013?
Thank you


All times are GMT -4. The time now is 10:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com