72 C20 4 link 4x4 conversion
1 Attachment(s)
I thought some would be interested in my 4 link build. I'm converting to 4x4 using the factory crossmember and coil buckets and a high pinion Dana 60.
|
Re: 72 C20 4 link 4x4 conversion
4 Attachment(s)
Some more pics.
|
Re: 72 C20 4 link 4x4 conversion
What is your final frame height? What coils are you running? Anticipated tire size
? I have a 2005 Ford 60 that I am contemplating how to make work since the frame widths are so much narrower on the old frames vs new style frames. This might be an option for me |
Re: 72 C20 4 link 4x4 conversion
I'll be running 37's on it. The coils are 8" Rubicon express Jeep XJ springs. I used them on another project, a 2001 extended cab Shortbed Silverado with a very similar setup and the ride was awesome. I should end up with about 10" if lift. The Dana 60 is from a 79 F-250, very hard to find but the most versatile for custom setups like this.
|
Re: 72 C20 4 link 4x4 conversion
1 Attachment(s)
This is the 01 Silverado with the 8" Jeep coils. It ended up being 16" of lift on that truck.
|
Re: 72 C20 4 link 4x4 conversion
1 Attachment(s)
Trac bar bracket and oem style shock mounts finished up.
|
Re: 72 C20 4 link 4x4 conversion
That’s some really nice looking work!
|
Re: 72 C20 4 link 4x4 conversion
Thanks! It's coming along. I should have the front wrapped up this weekend then next weekend I'll do the shackle flip and springs in the rear. Then off to the body shop it goes.
|
Re: 72 C20 4 link 4x4 conversion
1 Attachment(s)
Look like I'll be ordering some shorter springs
|
Re: 72 C20 4 link 4x4 conversion
Awesome!
|
Re: 72 C20 4 link 4x4 conversion
How much will the springs compress with the drivetrain installed? Might sit where you want it then?
|
Re: 72 C20 4 link 4x4 conversion
In that pic I actually have a ratchet strap pulling the front end down about two inches but I imagine it will probably come down another inch or so. Swapping springs after it's together is only a two beer job.
|
Re: 72 C20 4 link 4x4 conversion
Man, that is sweet. If you came up with a kit, I bet you could sell a few...
|
Re: 72 C20 4 link 4x4 conversion
Quote:
|
Re: 72 C20 4 link 4x4 conversion
1 Attachment(s)
Finally got it finished and on the road.
|
Re: 72 C20 4 link 4x4 conversion
3 Attachment(s)
A few more.
|
Re: 72 C20 4 link 4x4 conversion
1 Attachment(s)
Drivers side
|
Re: 72 C20 4 link 4x4 conversion
Looks killer!!!! Top notch work!!!
|
Re: 72 C20 4 link 4x4 conversion
Thanks.
|
Re: 72 C20 4 link 4x4 conversion
That came out really nice. I'm putting a parallel 4 link on my '67, hopefully it'll come out just as nice as yours!
|
Re: 72 C20 4 link 4x4 conversion
Thankyou. The ride is great with the coils up front.
|
All times are GMT -4. The time now is 10:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com