The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MO Night one,,, box one.... (https://67-72chevytrucks.com/vboard/showthread.php?t=766068)

specialtyretail 06-21-2018 06:43 PM
Night one,,, box one....
 
2 Attachment(s)
Gradually sifting through the boxes that have been piling up with just stuff in them. Nothing special, just truck parts. All prices are shipped. First is the spring and washer from an intermediate shaft for a 69 thru 72 truck. $11.00 shipped.

specialtyretail 06-21-2018 06:44 PM
Re: Night one,,, box one....
 
3 Attachment(s)
SOLD,,,, THANKS.... Power steering line frame clamp. $9.00 shipped.

specialtyretail 06-21-2018 06:46 PM
Re: Night one,,, box one....
 
3 Attachment(s)
SOLD,,,, THANKS.... Aftermarket three speed floor shifter handle with a nice knob. $20.00 shipped.

specialtyretail 06-21-2018 06:47 PM
Re: Night one,,, box one....
 
4 Attachment(s)
SOLD,,,, THANKS.... Windshield wiper motor connector linkage. Includes clip. $11.00 shipped.

specialtyretail 06-21-2018 06:49 PM
Re: Night one,,, box one....
 
4 Attachment(s)
Delco Moraine power brake booster. Was with the last 70 model truck we brought in. $35.00 shipped.

specialtyretail 06-21-2018 06:51 PM
Re: Night one,,, box one....
 
2 Attachment(s)
SOLD,,,, THANKS.... I cannot believe I am actually listing these, but I always have people asking for them. Used,, yes,,, used bumper bolts. $11.00 for the lot.

specialtyretail 06-21-2018 06:53 PM
Re: Night one,,, box one....
 
3 Attachment(s)
SOLD,,,, THANKS.... Interior heater/air conditioner duct parts. $12.00 shipped. Thanks, Fred.

Tuff Gong 06-22-2018 11:53 AM
Re: Night one,,, box one....
 
Do you happen to have any 72 valve covers for a 350?

med.bronze 06-22-2018 01:24 PM
Re: Night one,,, box one....
 
Fred I’ll take the bumper bolts if they are all oem. Thanks-Ryan

specialtyretail 06-22-2018 01:39 PM
Re: Night one,,, box one....
 
Quote:
Originally Posted by med.bronze (Post 8286713)
Fred I’ll take the bumper bolts if they are all oem. Thanks-Ryan
Hey Ryan. I do not know for sure, they are just some we have removed from trucks in the past. I THINK they are, but sure do not want to mislead anyone. Thanks, Fred.

specialtyretail 06-22-2018 01:40 PM
Re: Night one,,, box one....
 
Quote:
Originally Posted by Brian Atkinson (Post 8286656)
Do you happen to have any 72 valve covers for a 350?
Brian, I have a set that came of the last 72 we did. I will get you pics this evening so you can be sure they are what you are needing. Thanks, Fred.

jfnar 06-22-2018 02:54 PM
Re: Night one,,, box one....
 
I'll take the handle and knob. Thanks.

specialtyretail 06-22-2018 03:20 PM
Re: Night one,,, box one....
 
Quote:
Originally Posted by jfnar (Post 8286749)
I'll take the handle and knob. Thanks.
It is yours. Thanks, Fred.

jfnar 06-22-2018 04:00 PM
Re: Night one,,, box one....
 
Payment made. Thanks.

clay68c10 06-22-2018 04:23 PM
Re: Night one,,, box one....
 
Do you happen to have a heat/defrost diverter or vent flap box that goes along with the s-duct??

jeb1867 06-22-2018 04:59 PM
Re: Night one,,, box one....
 
Hey Fred,

I'll take the bumper bolts if Ryan passes.

Jake

med.bronze 06-22-2018 05:56 PM
Re: Night one,,, box one....
 
I appreciate your honesty Fred. I’ll go ahead and take the bumper bolts. Thanks-Ryan

med.bronze 06-22-2018 11:21 PM
Re: Night one,,, box one....
 
Payment sent. Thanks again Fred.

Oddfire 06-23-2018 08:49 AM
Re: Night one,,, box one....
 
Fred do you by chance have any V8 point distributors? I'm looking for
2 cores to rebuild with petronix conversion kits. thanks Jamie

specialtyretail 06-23-2018 12:40 PM
Re: Night one,,, box one....
 
Quote:
Originally Posted by Oddfire (Post 8287243)
Fred do you by chance have any V8 point distributors? I'm looking for
2 cores to rebuild with petronix conversion kits. thanks Jamie
Right now, I sure don't. Thanks, Fred.

specialtyretail 06-23-2018 12:41 PM
Re: Night one,,, box one....
 
Quote:
Originally Posted by clay68c10 (Post 8286826)
Do you happen to have a heat/defrost diverter or vent flap box that goes along with the s-duct??
I do not, this is just some left over stuff. Thanks, Fred.

clay68c10 06-24-2018 05:20 PM
Re: Night one,,, box one....
 
I'll take Interior heater/air conditioner duct parts. $12.00 shipped.
Payment sent

specialtyretail 06-25-2018 09:17 AM
Re: Night one,,, box one....
 
Quote:
Originally Posted by clay68c10 (Post 8288095)
I'll take Interior heater/air conditioner duct parts. $12.00 shipped.
Payment sent
They will go out Tuesday. Thanks, Fred.

dave6672 06-25-2018 10:10 AM
Re: Night one,,, box one....
 
Fred, I'll take the wiper motor connector linkage with the clip for $11.00. I will pay you right away. Thanks, Dave

specialtyretail 06-25-2018 11:31 AM
Re: Night one,,, box one....
 
Quote:
Originally Posted by dave6672 (Post 8288493)
Fred, I'll take the wiper motor connector linkage with the clip for $11.00. I will pay you right away. Thanks, Dave
It will go out Tuesday. Thanks, Fred


All times are GMT -4. The time now is 11:14 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com