The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Floor Alignment (https://67-72chevytrucks.com/vboard/showthread.php?t=767152)

TA_C10

07-09-2018 03:05 PM

Floor Alignment

Guys, I cut my floors out before I realized I needed to brace them first. What can I do to make sure I get them aligned properly before welding in the new pieces? I cut the supports out already too.

https://photos.app.goo.gl/t4b4wYRAUiuuWea7A

https://photos.app.goo.gl/dWhNU4utq872umV29

https://photos.app.goo.gl/cPqt79QSnK3mDrtm7

:whine:

Grumpy old man

07-09-2018 03:40 PM

Re: Floor Alignment

Cut some braces to have ready to weld in place , rehang the door and align the door to cab gaps using ratchet straps all the way around ,weld braces in place. cross your fingers and remove straps to see if it stays in place .:smoke:

All times are GMT -4. The time now is 12:27 AM.