8 bolt rims
 

want to put 2006 rims aluminum truck rims on a 1970 gmc 3/4 i tried on the rims they fit .want to know where i can buy nuts to fit that will allow me to use the factory caps.

Re: 8 bolt rims
 

Ebay has some.
Your local parts place should too.
I’ve bought some from Napa.
https://www.ebay.com/sch/i.html?_fro...ts&_dcat=33749

Ask for dual threaded lugnuts.

Re: 8 bolt rims
 

Try EZaccessory.com, was cheaper than evry other place I tried.I think I had them in something like 4 days.

Re: 8 bolt rims
 

My son has some extra (non-GM) aluminum wheels from his squarebody, he just upgraded to Methods.

The issue with the newer wheels (he had a set of 06 2500 aluminum's) the offset puts them in really far and close to the suspension. you may not like the look. You can get wheel spacers though that bolts onto your hubs and then you bolt the wheels onto the spacers.

Re: 8 bolt rims
 

Here's a thread with numerous pictures of different 8 lug wheels and links to lug nut sources.
http://67-72chevytrucks.com/vboard/s...d.php?t=330740

As stated above, the aluminum wheels you are thinking about use dual thread lug nuts. These wheels were used starting in 2001 and would have used metric lug nuts. You will find several eBay sellers who sell the SAE threaded versions in 9/16" and 1/2". If your 1970 truck has the original studs, you'll need 9/16" nuts.
https://www.ebay.com/itm/32-LUG-NUTS...sid=m570.l1313