1969 blazer project. A few questions before I dive in.
1 Attachment(s)
So the short version is I found a 69 blazer locally that I pulled the trigger on and have a few questions. What wheels came on this truck? I've tried to do my own research but have not turned up a definite answer. I've found anything from 15x5, 15x6 to 16x6. It was optioned with the PO1 caps if that helps.
Also, were hickey parts available for Blazers in 69? When did parts like the roll bar and outside tire carrier become available? Attachment 1890284 |
Re: 1969 blazer project. A few questions before I dive in.
Nice buy. Can you post a SPID pic when possible? With po1 covers wheel diameter was 15” (not 16”) and at that time width was what - 6”?
Edit: wheel width was 5.5” when po1s ordered based upon required tire size details here: https://www.gmheritagecenter.com/doc...let-Blazer.pdf |
Re: 1969 blazer project. A few questions before I dive in.
1 Attachment(s)
Thanks for commenting. Here is a spid pic.
Attachment 1890291 |
Re: 1969 blazer project. A few questions before I dive in.
Good deal. I added some info above...
|
Re: 1969 blazer project. A few questions before I dive in.
Thanks deadheadnm. That was an interesting read. So at least I know what to look for. 15x5.5 3 nub wheels for drum brakes. Sounds like a needle in a hay stack.:lol:
|
Re: 1969 blazer project. A few questions before I dive in.
So I found three 15x6 wheels that will work. On the hunt for the last one and am wondering what color the wheels are supposed to be when equipped with the PO1 covers? I know you only see the edge and I think they should be white but let me know please.
|
Re: 1969 blazer project. A few questions before I dive in.
All steel wheels were white from the factory from what I have heard - regardless of size.
Nice project by the way - congrats! |
Re: 1969 blazer project. A few questions before I dive in.
Here’s a restored set of wheels: http://67-72chevytrucks.com/vboard/s...d.php?t=785109
|
Re: 1969 blazer project. A few questions before I dive in.
Thanks deadheadnm. I just reached out to him.
|
Re: 1969 blazer project. A few questions before I dive in.
Looks like you found the needle pretty quick on those restored wheels. Good deal man!
Get some more pix of the new truck. |
Re: 1969 blazer project. A few questions before I dive in.
I might have a couple if those do not work out for you
|
Re: 1969 blazer project. A few questions before I dive in.
1 Attachment(s)
|
Re: 1969 blazer project. A few questions before I dive in.
Thanks for deciphering my SPID. I couldn’t read mine, then I compared yours to mine and they are identical. 👍🏽
|
All times are GMT -4. The time now is 07:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com