72 C30 frame, parting or complete
 

Complete chassis without engine trans and big block engine mounts, has nice exhaust $800

Rear shock mounts seem to be same as 4wd, $100 shipped

Big block frame mounts, $175 shipped without clams.
Nice but different dual exhaust hangars, $75 for the center pair.

Re: 72 C30 frame, parting or complete
 

Well randy you know how I am with my Eaton’s and I doubt it is but if a 4.10 text me about it. Also if you start cutting the frame up I could go for a crossmember still and I know highway by the sea would be happy for the carrier support crossmember. Also when you get a minute can you shoot me some dimensions on that tank please. Lastly I’m missing a parking brake cable guide on my drivers side, this is the passenger side one. It hides behind the crossmember.

Re: 72 C30 frame, parting or complete
 

Hi Randy, how wide is the rear end from the outside of the outer tires?

Re: 72 C30 frame, parting or complete
 

As you see one tire is off so not easy to measure....

Re: 72 C30 frame, parting or complete
 

sorry, didn't notice

Re: 72 C30 frame, parting or complete
 

I can estimate it, all you want is outside it tire width?

Re: 72 C30 frame, parting or complete
 

yes, ballpark number is fine

Re: 72 C30 frame, parting or complete
 

Outside to outside of each tire i would say to the nearest inch its 82”

Re: 72 C30 frame, parting or complete
 

What i mean is its 82” wide and i dont think im off by more than 1/2” of that figure.