67 Factory Tach Cluster From C60
5 Attachment(s)
Just ran across a 67 C60 that is going to the boneyard . I pulled this and hope to go back if still there. I did not have time to pull the harness or other parts. Just ran out of time. Truck was non running so no idea of function. There is a small scuff on the tach face.
I usually do not do much with 67-72 parts so wondering what its worth . Thanks |
Re: 67 Factory Tach Cluster From C60
200-225?
|
Re: 67 Factory Tach Cluster From C60
Interested in buying if you sell: But don’t know value. Was this a v8 or 6cylinder truck. Thanks Don
|
Re: 67 Factory Tach Cluster From C60
Right now I am looking for a value. This category has been getting a lot of flack for it being turned into a buy and selll category which it is not. If I can get an idea of its value I will create a new thread in the parts for sale category. . This was from a V8 truck .
|
Re: 67 Factory Tach Cluster From C60
Quote:
|
Re: 67 Factory Tach Cluster From C60
I sold several untested with 60lb gauges for $300 each. The 80lb should increase value a little if the face of the actual gauge is in good shape but the bezel may hurt value since it is a big truck bezel which is different from the C10-30 where the steering column goes thru. The speedo and fuel gauge may also have big truck idiot lights in them as well instead of the smaller truck versions
|
Re: 67 Factory Tach Cluster From C60
Thanks Richard . That gives me a good idea. I am going to clean it up a little and test some of the gauges. I am going to go back and get the harness for the tach and the ignition switch and door locks if they match. Hopefully it is not gone. It was being sold for scrap . UGH
|
Re: 67 Factory Tach Cluster From C60
the fuel gauge will have different wording on the red lenses than the c10-c30 trucks but will work just fine.
|
All times are GMT -4. The time now is 03:24 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com