$1.00 60-63 C10 Cab Cuts
4 Attachment(s)
Just got this cab. Not sure if any of you guys may need some cab cuts. Everything is available except for the BBW.
$1.00 plus the cost of shipping to you. |
Re: $1.00 60-63 C10 Cab Cuts
Whats radio area look like?
|
Re: $1.00 60-63 C10 Cab Cuts
lower A pillar area, inside the cab about level with the dashboard
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
5 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Hi 67 I'll take the transmission firewall section and the radio delete plate. Thanks.
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Speaker bracket happen to be still there? Defrost vents?
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Looks something like this to the right.
|
Re: $1.00 60-63 C10 Cab Cuts
Any rust through on the upper corners of the windshield area? I need both sides inside and out. Also, if it has the passenger side sun visor bracket, I could use that area as well
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
I would take a 3 of pieces of the stamped back of the cab highlighted, say about 1 inch on each side of the bends and about 6 inches up, so they can fit in a priority box like Small Box 8 11/16" x 5 7/16" x 1 3/4" $7.65
or Medium Boxes 11 1/4" x 8 3/4" x 6" or 14" x 12" x 3 1/2" $13.20 , thanks Joe |
Re: $1.00 60-63 C10 Cab Cuts
4 Attachment(s)
Quote:
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Quote:
My zip is 30188 Thanks! *Edit* I will go check on my cab in a couple minutes to see if I need the inside part or not. |
Re: $1.00 60-63 C10 Cab Cuts
I'll start working on the cab cuts tomorrow.
|
Re: $1.00 60-63 C10 Cab Cuts
I checked my cab on the inside. It looks ok. It's the outside part that I know has some big holes in it
|
Re: $1.00 60-63 C10 Cab Cuts
How much of the back window are you keeping? The whole panel, or are cuts along the bottom of the cab at the pinch weld available?
I need about two inches high, along the driver's side. It's been a while since I've seen the cab--if you're good with cutting that area, I'll go find out what I need exactly. -Brad |
Re: $1.00 60-63 C10 Cab Cuts
I’d like to have one side of the dash, for the “hump” portion on top.
|
Re: $1.00 60-63 C10 Cab Cuts
Either side of the dash will be fine for my purposes, whichever is the straightest.
|
Re: $1.00 60-63 C10 Cab Cuts
1 Attachment(s)
Can i get this section cut out please? let me know how much to 94513. Thanks
|
All times are GMT -4. The time now is 10:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com