The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Rocker replacement questions (https://67-72chevytrucks.com/vboard/showthread.php?t=816118)

conoco 12-26-2020 04:34 PM

Rocker replacement questions
 
I am looking at ordering the parts for my rockers. Everything is in pretty good shape but the front and rear cab supports should be replaced. They are all there but they are starting to be eaten through around the middle of the support.

My rockers however need to be replaced. I was looking at just ordering the "Outer cab floor extensions" which is what i need to completely replace some of the eaten through areas just on my rockers.

My question is ( With the outer cab floor extensions, do I need to still order the rocker panels? I was thinking that the floor extensions had the rockers built into them ands was all one piece) Is there anything else I need to order along with the floor extensions? The pillar mounts are good. I sanded them down and there is no eaten through areas. I do need to replace the bottom door panel but i will wait until after the rockers are completed.

Any advice would be great. Thank you.

57taskforce 12-26-2020 05:01 PM

Re: Rocker replacement questions
 
You’ll still need the outer rocker. The inner rocker is contained in the outer floor extension patch you mentioned.

conoco 12-26-2020 07:18 PM

Re: Rocker replacement questions
 
thank you. I'll make the order.


All times are GMT -4. The time now is 12:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com